1029 - Partial Extension Center Mount Ball Bearing Slide - 16 kg (35 lb) Capacity

To add to cart, choose from the options below.

The original undermount drawer slide. Eliminating side-space requirements while creating a seamless design, the 1029 model is a single-slide, concealed solution perfect for residential cabinetry and furniture as well as small retail displays and storage.

- Supports loads up to 35 lbs
- For drawers up to 16" wide
- For additional technical information see below

Offering ¾-extension and a convenient friction disconnect, this undermount motion hardware is a go-to choice for modern renovations and upgrading fixtures with smaller, lighter drawers.

Length:

Drawer Depth:

Cabinet Depth:

Select Options

Product #	Length	Drawer Depth	Cabinet Depth
10292G113	12 7/8 in	10 5/8 to 12 1/2 in	13 to 14 1/2 in
10292G115	14 7/8 in	12 5/8 to 14 1/2 in	15 to 16 1/2 in
10292G117	16 7/8 in	14 5/8 to 16 1/2 in	17 to 18 1/2 in
10292G119	18 7/8 in	16 5/8 to 18 1/2 in	19 to 20 1/2 in
10292G121	20 7/8 in	18 5/8 to 20 1/2 in	21 to 22 1/2 in
UCT10292G123	22 7/8 in	20 5/8 to 22 1/2 in	23 to 24 1/2 in
10292G123	22 7/8 in	20 5/8 to 22 1/2 in	23 to 24 1/2 in

TECHNICAL SPECIFICATIONS

Load Capacity

35.3 lb*

Motion Technology

Standard

Series

1029

Slide Extension

Partial Extension

3/4

Slide Mounted

Center Undermount

Bearing Type

Ball Bearing

Finish

Zinc

Standards and Certifications

RoHS

Brand

Accuride

Disclaimer

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.

INCLUDED PRODUCT(S)

- Adjustable rear mounting sockets
- Nylon glides

IMPORTANT INFORMATION

- Applications: commercial, residential and kitchen
- Features: center mount, no side space requirement and friction disconnect
- Mounting: under-drawer
- Extension: please see Richelieu chart
- Capacity: 35 lbs (16 kg) based on a 18 in (45 cm) slide
- Action: steel ball bearings
- Space required: 0.38 in (9.6 mm)