Welcome, Sign in or Register
English - USA

Change language

Change region

 > 
 > 
 > 

Coplanar System with Soft-Closing Action Both Ways, for 2 Doors, Wall Mounting, max. 20 kg (44 lb.)

For two 600 mm-wide doors

  • Animation
  • Photos
  • Videos

Product #: WEBKIT1006635
Per unit
Qty
Slide-Over Door System for Upper Cabinets with Two Doors
Product #: 8920600WN
Slide-Over Door System for Upper Cabinets with...
Set
Qty
Richelieu only sells to businesses. If you’re a consumer and would like to order our products, please contact your local hardware retailer.

Door Type
Wood
Door Installation
Full Overlay
Track Mounting
Surface - Outside the Cabinet
Operation
Coplanar
Capacity per DoorMax. 44 lb (19.96 kg)
Installation Type
Recessed
Soft-Motion System
Two-Way Operation
Roller Position
Upper
Track Length1.2 m (47 1/4 in)
ApplicationCabinet, Furniture
Door Thickness16 mm (5/8 in)
Number of Doors2
Roller Type
Ball Bearing (Quiet)
Track MaterialAluminum
Track FinishSatin Aluminum
For Use with Aluminum ProfileMinimum Frame Size: 35 mm
Packaging formatPer unit

  • Overview
  • Technical Documents

Description
This system allows each door to pull out and slide in front of the other door. When closed, the doors are flush, retaining the look of a standard cabinet. Designed for upper cabinets: the top mechanism installs to the exterior top of the cabinet, while the bottom mechanism slides inside the base of the cabinet on a recessed track.
Important Information
Allow at least 35 mm of space from the ceiling for mounting and adjusting.
Advantages and benefits
• Quiet ball bearings
• Soft-closing system
• For two 600 mm-wide doors
• Maximum door height: 1200 mm
• Maximum door thickness including handles: 45 mm
Application
Kitchens, bathrooms, office furniture, laundry rooms, hotels, laboratories, hospitals, clinics
Included Product(s)
• Dual roller carrier
Disclaimer
Note:
Picture for visual reference only: actual product may vary from that shown in photo.
Be sure to order hardware before beginning fabrication or installation work.
Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes, modify quite produced or information without prior notice!
All technical and drawings documents contain examples for the assembly of different supplier hardware. The customer cannot derive any claims from the use of these documents. No responsibility is assumed for design details relating to the construction or project.
At any time the execution and installation must be done by qualified persons.
Never exceed the maximum weight or the maximum dimension recommended by the manufacturer.
Always make sure to fix properly the product using the right fixation for the proper material.
Never use any spray lubricant on these products.

Disclaimer:
The preceding information as well as any technical recommendation given in writing, verbally or based on tests are provided to the best of our knowledge.
However, they are non-binding recommendations only and do not affect your responsibility to determine the correctness of given recommendations and suitability of the product for your particular purposes.
The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore fall exclusively in your area of responsibility.
Sales of our products are affected according to our most updated General Sales and Delivery Conditions.
Sales of our products are subject to our most recent General Sales and Delivery Conditions.
Please note that Richelieu will not accept any returns or claims for unpackaged products.