Discreet, compact hardware

This system is designed for situations where a high load capacity is required, but a less obtrusive roller is preferred for aesthetic reasons. Suitable for a door 20-30 mm thick.

Extra-durable ball bearings

Specialized mechanism for sliding wooden or metal doors.
• Top-supported carriage
• Upper track in aluminum with natural, anodized and lacquered finish
• Full ball bearings (FBB)
• Track with pre-drilled holes every 25 cm

Mounting screws not included.

Easy frontal installation

• Height adjustment
• High-quality rollers and aluminum track ensure a smooth and silent slide
• Stoppers with retention device are concealed inside the track
• Option to install 2 tracks in parallel to allow for bypass doors
• The U 45 fascia installs easily, giving a polished, elegant finish and concealing the mounting plates
• Can be installed overlay with the lateral brackets, avoiding the need for structural modification
• Has a floor guide to keep the door aligned

Fast assembly

The clip-on installation system allows fast and easy installation and removal.

Central Drive Technology

• With the ball bearings encapsulated in the body of the carrier, a balanced and extremely quiet movement is transmitted to the wheels, helping to ensure a longer life span.
• Protects against dust, grim, and other external agents that may affect the overall function of the carrier.
• Minmum gap between door / track because of concealed hardware.
• Easy to install unique mounting plates for lateral height regulation.
• Stoppers with retention device installed inside the track retain the door position.
• Optional U45 Fascia easily connects with a snap to the U45 track providing a clean, solid, and elegant look.

2 mm gap between rail and door

Top-rolling system concealed inside the door.

Minimal installation height

Designed for one wooden door weighing up to 60 kg. This is the system for reliable flush ceiling mounting, featuring a minimal installation height of only 31 mm.

Running gear installation and height adjustment are simple, a characteristic of EKU. This system does not require a bottom track and is suitable for ceiling mounting.

Quick and easy installation

Complete set for concealed pocket door installation. Width is adjustable to fit the wall interior. In the application photo provided, two sets are installed opposite one another.

Heavy-duty pocket door kit.

• Can be installed as one continuous piece for single or double doors.
 - Overall thickness of 3-5/8", designed for use with standard 2x4 wall construction.
 - Single piece, warp-free extruded aluminum header.
 - 8 ball-bearing nylon wheels per door.

Lets you combine wood and glass easily.

A fit-anywhere, frameless sliding hardware system for glass sliding doors weighing up to 70 kg (154 lbs). Ideal not only for walk-in closets, but also for room-height and flexible partitions in residential and office settings. The option to combine glass and wood sliding doors gives new freedom to architects and installers when the two hardware systems are used together. The combination of a surface-mounted continuous bottom guide profile and spring-loaded floor guides easily accommodates differences in floor-to-ceiling height and permits any combination of wood and/or glass. HAWA-Ordena 70/F has also been designed with problem-free retrofitting in mind.

Can be combined with the

A fit-anywhere, frameless sliding hardware system for wood sliding doors weighing up to 70 kg (154 lb). Ideal not only for walk-in closets, but also for room-height and flexible partitions in residential and office settings. The option to combine glass and wood sliding doors gives new freedom to architects and installers when the two hardware systems are used together. The combination of a surface-mounted continuous bottom guide profile and spring-loaded floor guides easily accommodates differences in floor-to-ceiling height and permits any combination of wood and/or glass. HAWA-Ordena 70/F has also been designed with problem-free retrofitting in mind.

Adjustable dimensions

For one sliding pocket door with a thickness of up to 1-3/4" for a finished opening of 24" to 36". The jump-proof track is constructed of corrosion-resistant aluminum.

For medium to heavy use

• Four ball-bearing wheels with nylon tires per hanger
• Lock nuts maintain vertical adjustment

The C-108 side-mounting, all-in-one track eliminates the need for additional hardware or millwork for wall mounting.

Two-way suspension

The HAWA-Junior 80/Z is a highly reliable hardware system with two-way suspension for wooden sliding doors with a maximum panel weight of 80 kg (176 lb.). The two-way suspension permits the sliding doors to be suspended or removed in two different ways.

For low-headroom applications

The HAWA-Junior/B system, designed for doors weighing 80 to 250 kg (176 to 550 lb.) apiece, comes with suspension profiles for minimum installation height.

For medium to heavy use

• Four ball-bearing wheels with nylon tires per hanger.
• Lock nuts maintain vertical adjustment.

2 mm gap between track and door

Concealed top-mounting sliding system.

Level can be adjusted from the front

Top sliding system with concealed hardware.

Easy frontal installation

• Height adjustment
• High-quality rollers and aluminum track ensure a smooth and silent slide
• Brakes are concealed inside the track
• Option to install 2 tracks in parallel to allow for bypass doors
• The U 21 fascia installs easily, giving a polished finish and hiding the mounting plates
• Can be installed overlay the opening with the lateral brackets, preventing the need for any structural modification
• Has a floor guide that keeps the door aligned

Extra-durable ball bearings

Specialized mechanism for sliding wooden or metal doors.
• Top-supported carriage
• Upper track in aluminum with natural, anodized and lacquered finish
• Full Ball Bearings (FBB)
• Track with pre-drilled holes every 25 cm

Mounting screws not included.

Long-lasting silent rolling

• Upper track in aluminum, natural finish
• Traditional top-mounting system
• Anti-friction, quiet ball bearing rollers (SLID-Friction)
• Mounting screws not included
• Track pre-drilled every 25 cm

Minimal space between track and door

Kit for wooden sliding doors.

• Built with premium-quality quiet ball bearings.
• Anti-friction ball-bearing quiet rollers (SLID-Friction).
• With Retrac fittings for installation between panels or with both faces showing, with minimum 3 mm separation between fitting and panel.
• Rail pre-drilled every 25 cm.

Quick-release hanger

The Spinwheel hanger permits fast and easy door removal from the outside, whether or not a door is locked. (For example, the door can be removed to reach a patient in distress in a washroom who requires immediate assistance.)

Quick-release hanger

The Spinwheel hanger permits fast and easy door removal from the outside, whether or not a door is locked. (For example, the door can be removed to reach a patient in distress in a washroom who needs immediate assistance.)