Datasheet
TRIADE MINI - Concealed Mounting Bracket for Wall Shelf
Product # 1621412G
Triade Mini is a concealed mounting bracket designed to simplify shelf installation for shelves 25 mm thick.
ADVANTAGES AND BENEFITS
Comes with three independent adjustment features:
1) VERTICAL
Before installing the shelf, the mounting brackets can be adjusted in height and vertically aligned through the slots.
2) HORIZONTAL
While placing the shelf in position, the supporting pins can slide horizontally.
3) TILT
When the shelf is partially inserted, the shelf angle can be adjusted front to back by turning the supporting pins with a 12 mm open-ended wrench.
- Exclusive to Richelieu.
1) VERTICAL
Before installing the shelf, the mounting brackets can be adjusted in height and vertically aligned through the slots.
2) HORIZONTAL
While placing the shelf in position, the supporting pins can slide horizontally.
3) TILT
When the shelf is partially inserted, the shelf angle can be adjusted front to back by turning the supporting pins with a 12 mm open-ended wrench.
- Exclusive to Richelieu.
REQUIRED PRODUCTS
Requires ONE of the following products
OR
TECHNICAL SPECIFICATIONS
Product #
1621412G
Material
Zinc Alloy, Plastic Rubber
Color/Finish
Nickel
Wood Thickness
31/32 in*
Standards and Certifications
RoHS
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
IMPORTANT INFORMATION
To determine the right number of triade brackets, consult the Weight Chart in the Documents section.
Recommended drill bits:
91151452 and 911514170
Recommended drill bits:
91151452 and 911514170
DISCLAIMER
VERY IMPORTANT: IT IS STRONGLY RECOMMENDED TO USE THE TRIADE MINI IN COMBINATION WITH THE RELATED WALL BRACKET. OTHERWISE, RICHELIEU WILL NOT BE HELD RESPONSIBLE FOR ANY FAILURES.
It is the responsibility of the customer:
- to ensure that the wall is of a suitable quality to hold the shelf fitting in place.
- to use the correct fasteners for their application.
It is the responsibility of the customer:
- to ensure that the wall is of a suitable quality to hold the shelf fitting in place.
- to use the correct fasteners for their application.
