Welcome, Sign in or Register
English - USA

Change language

Change region

View list
 > 
 > 
 > 

Precision Compact Sliding System in Stainless Steel for 1 Door, Wall Mounting, max. 45 kg (99 lb.)

Compact mechanism with a high load capacity

  • Animation
  • Photos

Product #: WEBKIT10235
Per unit
Qty
Minimax Hardware for Glass Sliding Door		Product #: 89100610170
Minimax Hardware for Glass Sliding Door
Set
Qty
Stainless Steel Track		Product #: 892000203170
Stainless Steel Track
Length
Qty
40 mm Wall Mount, Stainless Steel - Minimax 		Product #: 89210020170
40 mm Wall Mount, Stainless Steel - Minimax
Per unit
Qty
Bottom Guide for Glass Sliding Door		Product #: 894010170
Bottom Guide for Glass Sliding Door
Per unit
Qty
Richelieu only sells to businesses. If you’re a consumer and would like to order our products, please contact your local hardware retailer.

Operation
Single Panel
Door Type
Glass
Door Installation
In Front of Wall
Track Mounting
Wall Front
Installation Type
Drill
Soft-Motion System
Not Available
Roller Position
Upper
Track Length3 m (9 ft 10 7/64 in)
also available in 2 m
Capacity per DoorMax. 99 lb (44.91 kg)
ApplicationDoor, Glass Partition, Cabinet, Furniture
Tempered Glass Door Thickness10 mm (25/64 in)
Number of Doors1
Optional Operation
Double on a single track
Roller Type
Ball Bearing (Quiet)
Track MaterialStainless Steel
Track FinishStainless Steel
Milling16 mm (5/8 in)
Packaging formatPer unit
Product adapted for people with reduced mobilityProduct adapted for people with reduced mobility

  • Overview
  • Brochures
  • Technical Documents

Description
This system is designed for situations where a high load capacity is required, but a less obtrusive roller is preferred for aesthetic reasons.
Important Information
* Use of safety glass recommended.
Advantages and benefits
Disclaimer
Note:
Picture for visual reference only: actual product may vary from that shown in photo.
Be sure to order hardware before beginning fabrication or installation work.
Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes, modify quite produced or information without prior notice!
All technical and drawings documents contain examples for the assembly of different supplier hardware. The customer cannot derive any claims from the use of these documents. No responsibility is assumed for design details relating to the construction or project.
At any time the execution and installation must be done by qualified persons.
Never exceed the maximum weight or the maximum dimension recommended by the manufacturer.
Always make sure to fix properly the product using the right fixation for the proper material.
Never use any spray lubricant on these products.

Disclaimer:
The preceding information as well as any technical recommendation given in writing, verbally or based on tests are provided to the best of our knowledge.
However, they are non-binding recommendations only and do not affect your responsibility to determine the correctness of given recommendations and suitability of the product for your particular purposes.
The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore fall exclusively in your area of responsibility.
Sales of our products are affected according to our most updated General Sales and Delivery Conditions.
Sales of our products are subject to our most recent General Sales and Delivery Conditions.
Please note that Richelieu will not accept any returns or claims for unpackaged products.
Included Product(s)
• Bumper stop
• Screws
• Wall mounts for track
• Floor guide
• Single roller carrier
 
 

Suggested products

Twin Ring Handle
#6933G170
Twin Ring Handle
#6951G170
Twin Handle
#8932521000170
Keyed Different Lock for Glass - No Drilling
#893969140
Stainless Steel Front Fastener
#895035170