Increase the storage space of a bedroom! Make life easier with these new bed sets (lift mechanisms and slatted frames) from Richelieu.

Metal-slat bed base with piston lifting mechanism.

Extend the bottom of your closet to reveal a ready-to-use wall bed, suitable for children and adults, thanks to its capacity of 190 kg.

Pull up the top of your wardrobe to reveal a wall bed with ladder, ready for use by young and old with a load capacity of 190 kg. The bottom of the wardrobe can also accomodate a retractable bed mechanism (#XULT36WBHZ), allowing you to conveniently create bunk bed.

The hydraulic piston lifting mechanism is designed to be used with our XULT36T product. It allows the bed base to raise diagonal or parallel to the housing case.

Lift mechanism and hardware that allows you to create a storage unit under your bed. See required products to choose the right bed frame.

Richelieu offers innovation once again with this two-in-one sofa and folding bed.

Metal bed slat base.

Frame is a metal tube made of cold-rolled coils according to UNI 7947 standard with intersection of 40 x 30 x 1.2 mm, sides, heads and supporting middle bar.
• Welded and drilled surface with plywood slats, steam-bent, pressed and glued. Glues used comply with current environmental regulations.

These 4 metal corners give better support to the XULTxxBMU bed system.

Metal bar designed for use with XULTxxBMU slatted bed bases. Gives greater stability to the bed system when installed.

The combination is the key! Richelieu`s new combination locks guarantee safety and convenience.

Cabinet leveler is foldable and adjustable in height for faster installation of base cabinets.

Pressure clip for use with folding leveler required products.

Adhesive clip for attaching side kick, when used with required products.
Adhesive clip to attach side kick for use when it is required by other products.

Locking devices with integrated height adjustment only

New four-dimensional adjustment
• Side-to-side, plus or minus 1.5 mm (front and rear)
• Height, 3 mm
• Tilt, 5 mm
• Depth, with optional locking device, 2.5 mm
• Depth, with elongated holes, plus or minus 4.5 mm

New four-dimensional adjustment
• Side-to-side, plus or minus 1.5 mm (front and rear)
• Height, 3 mm
• Tilt, 5 mm
• Depth, with optional locking device, 2.5 mm
• Depth, with elongated holes, plus or minus 4.5 mm

New four-dimensional adjustment
• Side-to-side, 1.5 mm (front and rear)
• Height, 3 mm
• Tilt, 5 mm
• Depth, with optional locking device, 2.5 mm
• Depth, with elongated holes, plus or minus 4.5 mm