Line art
Extra Heavy-Duty Floor Leveler
Product # NCM1075
The leveling feet are super easy to install. Just install the legs with the ledger under the bottom of the furniture using the four screws. When you are able to reach the shaft below, use a pry bar to lift the cabinet and turn the shaft with your fingers. When access is limited, use the provided 7/32 in (5 mm) hex wrench for micro adjustment until they are perfectly level to your desired height.
ADVANTAGES AND BENEFITS
- Height adjustable on an 8° swivel base.
- Pivoting steel base is capped in polyethylene for carpet and floor protection.
- Integral ledger ensures that the load is carried by the leveler, not the screws.
- Free spinning foot and inner hexagon spanner for adjustments, to compensate for irregular floors.
- Pivoting steel base is capped in polyethylene for carpet and floor protection.
- Integral ledger ensures that the load is carried by the leveler, not the screws.
- Free spinning foot and inner hexagon spanner for adjustments, to compensate for irregular floors.
TECHNICAL SPECIFICATIONS
Product #
NCM1075
Threaded Stem
3/8" - 16
Stem Length
2 11/16 in
Width - Overall Dimensions
1 5/16 in
Length - Overall Dimensions
2 1/8 in
Load Rating
551 lb*
Finish
Zinc, Black
Material
Polyethylene, Steel
Height - Overall Dimensions
2 7/8 in
Base Diameter
1 1/4 in
Adjustment Range
Max. 2 1/4 in
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
