Instructions
Tambour Door - Aluminum Finish 20 mm Slats
To add to cart, choose from the options below.
| Product # | Minimum Interior Width | Maximum Interior Width |
|---|---|---|
| KITAMB30ALU | 550 mm (21-21/32") | 754 mm ( 29-11/16") |
| KITAMB36ALU | 750 mm (29-17/32") | 954 mm (37-9/16") |
ADVANTAGES AND BENEFITS
- Does not require cutting.
- Quick installation
- Complete components in the box
- Practical: full access to the contents of the cabinet
- Space-saving: the door opens inside the cabinet and does not obstruct the work area.
- Functional: soft-opening vertical door
- Versatile: use for new applications and renovation.
- Quick installation
- Complete components in the box
- Practical: full access to the contents of the cabinet
- Space-saving: the door opens inside the cabinet and does not obstruct the work area.
- Functional: soft-opening vertical door
- Versatile: use for new applications and renovation.
TECHNICAL SPECIFICATIONS
Material
Metal Extrusion on Polymer Base
Finish
Aluminum
Minimum Exterior Height
600 mm (23-5/8")
Maximum Exterior Height
1,000 mm (39-3/8")
Slat Width
25/32 in*
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
APPLICATION
- Kitchen and bathroom cabinets
- Audio-video furniture
- Residential cabinets and closets
- Shop displays
- Office furniture
- Audio-video furniture
- Residential cabinets and closets
- Shop displays
- Office furniture
INCLUDED PRODUCT(S)
Slats
Non-Locking Metallic Handle Profile
Handle Gliders
Rail (Track)
End Caps
Cover Profile
Cover Profile Base
#6 x 1/2" Flat Head Screws
#6 x 1/2" Pan Head Screws
8 - 18 x 1" Tapping Screws
5/16" x 1" Wooden Dowels
1 Grip Handle Stopper
Non-Locking Metallic Handle Profile
Handle Gliders
Rail (Track)
End Caps
Cover Profile
Cover Profile Base
#6 x 1/2" Flat Head Screws
#6 x 1/2" Pan Head Screws
8 - 18 x 1" Tapping Screws
5/16" x 1" Wooden Dowels
1 Grip Handle Stopper
IMPORTANT INFORMATION
Using a 3/4" (19 mm) board thickness will leave a 1/8" (3 mm) visible gap. We recommend that you edge the face of the cabinet before you install the face track.
Using a 5/8" (16 mm) board thickness will create a flush result.
An internal depth of >= 11-27/64" (290 mm) is required for the installation.
Using a 5/8" (16 mm) board thickness will create a flush result.
An internal depth of >= 11-27/64" (290 mm) is required for the installation.
