Instructions
8900 Series Full Extension Ball Bearing Slide - 227 kg Capacity
To add to cart, choose from the options below.
Extra heavy-duty lateral drawer slides with silencing bumper
These full extension drawer slides are designed for use in lateral applications where the maximum load does not exceed 227 kg (500 lb).
Extra heavy-duty full extension drawer slide with sizes up to 60" long supports a range of specialty commercial, industrial and vehicular applications. Features an unhanded, non-disconnect design and silencing bumper. Recommended for drawers up to 48" wide (actual load and width rating are dependent on application).
Extra heavy-duty full extension drawer slide with sizes up to 60" long supports a range of specialty commercial, industrial and vehicular applications. Features an unhanded, non-disconnect design and silencing bumper. Recommended for drawers up to 48" wide (actual load and width rating are dependent on application).
| Product # | Length |
|---|---|
| 8900BANO20 | 20 in |
| 8900BANO22 | 22 in |
| 8900BANO24 | 24 in |
| 8900BANO28 | 28 in |
| 8900BANO32 | 32 in |
| 8900BANO36 | 36 in |
| 8900BANO40 | 40 in |
ADVANTAGES AND BENEFITS
- Heavy-duty ball bearings carry the heaviest loads without sticking
- Heavy-duty stops are designed to survive rough field use
- Non-handed design for easy installation
- Non-disconnect
- Side-mounted
- Height 3" (±0.020")
- Heavy-duty stops are designed to survive rough field use
- Non-handed design for easy installation
- Non-disconnect
- Side-mounted
- Height 3" (±0.020")
TECHNICAL SPECIFICATIONS
Motion Technology
Silencing Bumper
Load Capacity
150 to 500 lb*
Slide Extension
Full Extension
Slide Mounted
Side Mounted
Bearing Type
Ball Bearing
Finish
Zinc
Additional Information
Non Disconnect
Application
Frameless
Brand
Knape & Vogt
Standards and Certifications
BHMA, KCMA, BIFMA
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
APPLICATION
Recommended for file drawers, office furniture, large pantry pullouts, tool storage pullouts, wide lateral file drawers, and vehicular storage drawers.
IMPORTANT INFORMATION
- Sold in pairs
- Load capacity from 150 to 500 lbs, depending on drawer width; see Data Sheet below
- Slide must never be used as a pull-out step, platform, or in any other application supporting human weight, as injury may result
- 0.26" (6.6mm) holes: 1/4" or M6 Euro Flat, Hex or Pan Screw
- 0.20" (5.2mm) holes: #10 or M5 Euro Flat, Hex or Pan Screw
- Load capacity from 150 to 500 lbs, depending on drawer width; see Data Sheet below
- Slide must never be used as a pull-out step, platform, or in any other application supporting human weight, as injury may result
- 0.26" (6.6mm) holes: 1/4" or M6 Euro Flat, Hex or Pan Screw
- 0.20" (5.2mm) holes: #10 or M5 Euro Flat, Hex or Pan Screw
