Included products
LED 4 m/13' Tape Light Roll 24 V dc 58 W
To add to cart, choose from the options below.
Tape on a roll
Can be cut every 10 cm (3.94") or after every 6th LED.
Quick-connect options available.
Quick-connect options available.
| Product # | Light Color | Kelvin Color Temperature (K) | Luminous Flux |
|---|---|---|---|
| 50460121 | Cool White | 6000 K | 1560 Lumen |
| 50460124 | Neutral White | 4000 K | 1440 Lumen |
| 50460122 | Warm White | 3000 K | 1320 Lumen |
ADVANTAGES AND BENEFITS
Easy-clip system to connect two strips together: no need to use any additional screws!
Available in 3 different color temperatures:
- 3000° Warm White
- 4000° Neutral White
- 6000° Cool White
Direct Quick Connect available.
- Quick Connect connecting cables available in 4 lengths: choose from 2", 20", 40", and 79".
Available in 3 different color temperatures:
- 3000° Warm White
- 4000° Neutral White
- 6000° Cool White
Direct Quick Connect available.
- Quick Connect connecting cables available in 4 lengths: choose from 2", 20", 40", and 79".
REQUIRED PRODUCTS
Requires the following products
Requires ONE of the following products
OR
OR
TECHNICAL SPECIFICATIONS
Location
Inside Cabinet, Closet, Other
Application
Kitchen, Living Room, Commercial, Furniture, Closet
Mounting
Surface
Luminaire
Flexible Linear
Lighting
Accent
Finish
White
Standards and Certifications
ETL
Length
13 ft
Width
3/8 in
Lighting Type
LED
Tension (V)
24 V
Watts
58 W
Group
LED Group G
Price Point
Elite
Maximum Length
13 ft (3.96 m) Max
Features
Dimmable
SUGGESTED PRODUCTS
- LED Profiles
- Switches and Dimmers
- Power cables and connectors
- Wire Management Moldings
- Transformers and Power Supplies
IMPORTANT INFORMATION
14.4 W per meter (3')
Requires power cord if you are cutting the tape light roll to start a NEW run.
3 different lengths available with quick-connect feature: 20", 40" and 79", in black or white.
Power supply required, with 3 options to choose from:
- 2652412 = 2' max run
- 2651236 = 6' max run
- 2651260 = 13' max run
Requires power cord if you are cutting the tape light roll to start a NEW run.
3 different lengths available with quick-connect feature: 20", 40" and 79", in black or white.
Power supply required, with 3 options to choose from:
- 2652412 = 2' max run
- 2651236 = 6' max run
- 2651260 = 13' max run
DISCLAIMER
One power cord to connect to power supply is included in each roll. If you need more power cords they are available separately.
Each LED tape light roll has 3M Adhesive tape on backside. You can affix the tape into position after you have measure and mark your installation location. You only have ONE CHANCE for correct installation if you try to unpeel the tape to reposition it, it will never fully adhere again. You will require additional 3M Adhesive, sold separately.
Be careful when you install the LED strip light on conducting surfaces, because the solder contact can cause a short circuit.
Avoid buckling the LED strip light because the PCB board can be damaged easily.
You can turn on the power supply in the final step when everything is set up.
Each LED tape light roll has 3M Adhesive tape on backside. You can affix the tape into position after you have measure and mark your installation location. You only have ONE CHANCE for correct installation if you try to unpeel the tape to reposition it, it will never fully adhere again. You will require additional 3M Adhesive, sold separately.
Be careful when you install the LED strip light on conducting surfaces, because the solder contact can cause a short circuit.
Avoid buckling the LED strip light because the PCB board can be damaged easily.
You can turn on the power supply in the final step when everything is set up.
