Supra - 891009170

Deluxe visible hardware, quiet motion

Product number : 891009170
+   -
Set

Requires the following products

Requires one of the following products

This system is designed for doors that do not allow threaded fasteners to be fixed to the leaf surface. Because this system attaches to the edge of the door leaf, it is the ideal solution for mirrored doors and other doors that require this style of mounting. Compatible with door leaves 25-80 mm thick.

Rail pre-drilled for wall mounting.

Function Single Panel
Door Type Wood, MDF
Door Thickness 1 9/16 in*
Weight Capacity per Door Max. 298 lb*
Door Installation In Front of Wall
Track Type 25 mm Rod
Track Mounting Wall Front Using Brackets
Door Mounting Method Screw
Roller Position Upper
Number of Doors 1
Roller Type Premium Ball Bearing
Rail Length 78 3/4 to 118 in*
Design Intent Standard Access Door
Finish Stainless Steel
Rail Material Stainless Steel
Rail Finish Stainless Steel
Displayed in These Showrooms Toronto
Packaging format Set
* Disclaimer

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.

Important Information

Note:
Picture for visual reference only: actual product may vary from that shown in photo.
Be sure to order hardware before beginning fabrication or installation work.
Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes or modify information without prior notice.
All technical drawings and documents contain examples for the assembly of different suppliers' hardware. The customer cannot make any claims based on the use of these documents. No responsibility is assumed for design details relating to a construction or project.
At all times, execution and installation must be undertaken by qualified persons.
Never exceed the maximum weight or the maximum dimensions recommended by the manufacturer.
Always be sure to install the product correctly using the appropriate fixation for your material.
Use a dry cloth to remove fragments, dust, and residue (wood and/or aluminum sawdust) from rails before the installation of the hangers.
Never use any spray lubricant on these products.

Included Product(s)

- Screws
- Single roller carrier
- Bumper stop
- Floor guide

Disclaimer

The preceding information as well as any technical recommendations given in writing, verbally or based on tests are provided to the best of our knowledge.
However, they are non-binding recommendations only and do not affect your responsibility to determine the correctness of given recommendations and suitability of the product for your particular purposes.
The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore fall exclusively in your area of responsibility.
Sales of our products are subject to our most recent General Sales and Delivery Conditions.
Please note that Richelieu will not accept any returns or claims for unpackaged products.

Recently viewed products