Spider - 891033170
Made and polished by hand
The Spider system represents retro design at its best. In terms of form, function and manufacturing complexity, this product is the top of the line. All pieces of this unique system are manually milled from solid stainless steel and extensively polished or ground by hand. Can be universally employed for doors made of wood or any other material.
Matching running rail fixtures are available for wall mounting.
|Door Type||Wood, MDF|
|Door Thickness||1 9/16 in*|
|Weight Capacity per Door||Max. 452 lb|
|Door Installation||In Front of Wall|
|Track Type||25 mm Rod|
|Track Mounting||Wall Front Using Brackets|
|Door Mounting Method||Drill|
|Number of Doors||1|
|Roller Type||Premium Ball Bearing|
|Rail Length||78 3/4 to 118 in*|
|Application||Closet & Walk-In Closet, Screen Panel|
|Groove Needed for Guiding System||Yes|
|Groove Depth||1/2 in*|
|Rail Material||Stainless Steel|
|Rail Finish||Stainless Steel (170)|
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
- Bumper stop
- Single roller carrier
- Floor guide
The preceding information as well as any technical recommendation given in writing, verbally or based on tests are provided to the best of our knowledge.
However, they are non-binding recommendations only and do not affect your responsibility to determine the correctness of given recommendations and suitability of the product for your particular purposes.
The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore fall exclusively in your area of responsibility.
Sales of our products are subject to our most recent General Sales and Delivery Conditions.
Please note that Richelieu will not accept any returns or claims for unpackaged products.
Advantages and benefits
- With three glass fasteners, Spider can easily carry heavy door leaves while ensuring precise adjustability and optimal stability.
Picture for visual reference only: actual product may vary from that shown in photo.
Be sure to order hardware before beginning fabrication or installation work.
Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes, modify quite produced or information without prior notice!
All technical and drawings documents contain examples for the assembly of different supplier hardware. The customer cannot derive any claims from the use of these documents. No responsibility is assumed for design details relating to the construction or project.
At any time the execution and installation must be done by qualified persons.
Never exceed the maximum weight or the maximum dimension recommended by the manufacturer.
Always make sure to fix properly the product using the right fixation for the proper material.
Never use any spray lubricant on these products.