C-107-4/C-108 - WEBKIT1000252

For heavy wall-mounted doors.

Product number : WEBKIT1000252
+   - Quantity

Included in this webkit

Requires the following products

Requires one of the following products

Four ball-bearing nylon wheels with carriages per roller. Clamp-type surface mounting, adjustable for different door thicknesses (1-3/4" to 2-1/4") thanks to shim spacers on the main bolt. The C-108 side-mounting rail eliminates the need for additional wall-mounting hardware.

Door Type Wood, MDF
Operation Single Panel
Door Installation In Front of Wall
Track Mounting Wall Front
Soft-Close System Not Available
Door Mounting Method Drill
Classification Heavy Duty
Roller Type Ball Bearing
Roller Position Upper
Rail Length 6 ft to 8 ft
Application Closet & Walk-In Closet, Storage, Screen Panel
Weight Capacity per Door Max. 350 lb
Number of Doors 1
Rail Material Aluminum
Rail Finish Mill Finish (M)
Door Thickness 1 3/4 to 2 1/4 in
Packaging format Per unit

Suggested products


The preceding information as well as any technical recommendation given in writing, verbally or based on tests are provided to the best of our knowledge.
However, they are non-binding recommendations only and do not affect your responsibility to determine the correctness of given recommendations and suitability of the product for your particular purposes.
The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore fall exclusively in your area of responsibility.
Sales of our products are subject to our most recent General Sales and Delivery Conditions.
Please note that Richelieu will not accept any returns or claims for unpackaged products.

Important Information

Picture for visual reference only: actual product may vary from that shown in photo.
Be sure to order hardware before beginning fabrication or installation work.
Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes, modify quite produced or information without prior notice!
All technical and drawings documents contain examples for the assembly of different supplier hardware. The customer cannot derive any claims from the use of these documents. No responsibility is assumed for design details relating to the construction or project.
At any time the execution and installation must be done by qualified persons.
Never exceed the maximum weight or the maximum dimension recommended by the manufacturer.
Always make sure to fix properly the product using the right fixation for the proper material.
Never use any spray lubricant on these products.

Recently viewed products