C411/Type-C - WEBKIT1001592
Designed for heavy use.
System for wood sliding pocket door with quick release.
- Can be installed as one continuous piece for single or double doors.
- Overall thickness of 3-5/8", designed for use with standard 2" x 4" wall construction.
- Single piece, warp-free extruded aluminum header.
- 8 ball-bearing nylon wheels per door.
|Number of Doors||
√Other available options
|Operation||Pocket / Recessed Panel|
|Door Type||Wood, MDF|
|Door Installation||Concealed Inside Wall|
|Track Mounting||On Ceiling Surface|
|Application||Closet & Walk-In Closet, Storage|
|Door Mounting Method||Screw|
|Soft-Close System||Universal Option Available|
|Roller Type||Premium Ball Bearing|
|Weight Capacity per Door||Max. 150 lb|
|System||Pocket Door Kit|
|Rail Finish||Mill Finish (M)|
|Door Thickness||1 3/8 to 1 3/4 in|
|Packaging format||Per unit|
- Steel uprights (4)
- 1" X 3" X 72" MDF Board (1)
- Type C extruded aluminum header (1)
- C-411 hangers (2)
- C-411 top plates (2)
- C-411 T-bolts (2)
- Foot brackets (2)
- Header bracket (2)
- C-411 spinwheels (2)
- C-1201 center guides for 1-3/8" door (2)
- C-1202 offset guides for 1-3/4" door (2)
- C-99 rubber dome bumper (1)
- C-100 door stop (1)
- 1/4" - #14 x 3/4" hex Tek screws (8)
- 5/16" hex nuts (4)
- 5/16" external tooth lock washers (4)
- #10 x 1-3/4" flat-head screws (8)
- #10 x 1-1/2" self drilling screws (8)
- #10 x 1-1/4" screws (5)
- #8 x 3/4" screws (10)
- 3/16" spacer washers (6)
- Fine thread drywall screws (25)
Advantages and benefits
- Quick-release hanger
The Crowder frame system is the ideal solution where space is limited or where a hinged door would be undesirable or inconvenient.
Picture for visual reference only: actual product may vary from that shown in photo.
Be sure to order hardware before beginning fabrication or installation work.
Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes or modify information without prior notice.
All technical drawings and documents contain examples for the assembly of different suppliers' hardware. The customer cannot make any claims based on the use of these documents. No responsibility is assumed for design details relating to a construction or project.
At all times, execution and installation must be undertaken by qualified persons.
Never exceed the maximum weight or the maximum dimensions recommended by the manufacturer.
Always be sure to install the product correctly using the appropriate fixation for your material.
Use a dry cloth to remove fragments, dust, and residue (wood and/or aluminum sawdust) from rails before the installation of the hangers.
Never use any spray lubricant on these products.
The preceding information as well as any technical recommendations given in writing, verbally or based on tests are provided to the best of our knowledge.
However, they are non-binding recommendations only and do not affect your responsibility to determine the correctness of given recommendations and suitability of the product for your particular purposes.
The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore fall exclusively in your area of responsibility.
Sales of our products are subject to our most recent General Sales and Delivery Conditions.
Please note that Richelieu will not accept any returns or claims for unpackaged products.