EKU-DIVIDO 100 RMO

For wood and/or glass panels

The EKU Divido partition system is outstanding with clear design appeal. The EKU Divido 100 RMO is the standard top-running system for aluminum-framed doors with wooden or glass panels weighing up to 100 kg, and requires only minimal installation height. Aluminum frames are easy to cut to size to fit your door, as well as easy to install. Running gear installation and height adjustment are simple-- a characteristic of EKU. This system does not require a bottom track, and is suitable for ceiling mounting.

Operation Single Panel
Door Type Aluminum Frame
Door Installation In Front of Wall
Application Closet & Walk-In Closet, Screen Panel
Door Mounting Method Concealed
Roller Position Upper
Soft-Close System One-Way Operation
Number of Doors 1
Roller Type Ball Bearing
Classification Medium Duty
Rail Finish Satin Aluminum (10) Velo Clear
Rail Length 11 ft 5 in*
Weight Capacity per Door Max. 220 lb*
Rail Material Anodized Aluminum
Door Thickness 1 3/16 in*
Door Width Max. 47 1/4 in*
Tempered Glass Door Thickness (ESG) 1/4 in*
Maximum Door Height Max. 9 ft*
* Disclaimer

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.

Available options :

Product number Track Mounting
Wall Front
On Ceiling Surface

Important Information

N.B. For soft closing in both directions, add 893102071 & 893114071 to your order. The distance between the rollers must be 22-7/16" center to center.

- Maximum width of the door: 1,200 mm
- Maximum height of the door: 2,750 mm
- An additional bottom guide with the track is recommended if your door width exceeds 900 mm.

Note:
Picture for visual reference only: actual product may vary from that shown in photo.
Be sure to order hardware before beginning fabrication or installation work.
Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes, modify quite produced or information without prior notice!
All technical and drawings documents contain examples for the assembly of different supplier hardware. The customer cannot derive any claims from the use of these documents. No responsibility is assumed for design details relating to the construction or project.
At any time the execution and installation must be done by qualified persons.
Never exceed the maximum weight or the maximum dimension recommended by the manufacturer.
Always make sure to fix properly the product using the right fixation for the proper material.
Never use any spray lubricant on these products.

Advantages and benefits

- Rails mount flush with the ceiling or on the surface.
- Simple customization of aluminum-framed doors.
- Aluminum-framed panels can combine wood and glass.
- Easy height adjustment with screwdriver.
- 1-, 2- and 3-track sliding solutions.

Application

- Walk-in wardrobes
- Partitions
- Projects
- Individualized interior design

Recently viewed products