EKU-DIVIDO 100 RMO - WEBKIT1006646
For wood and/or glass panels
The EKU Divido partition system is outstanding with clear design appeal. The EKU Divido 100 RMO is the standard top-running system for aluminum-framed doors with wooden or glass panels weighing up to 100 kg, and requires only minimal installation height. Aluminum frames are easy to cut to size to fit your door, as well as easy to install. Running gear installation and height adjustment are simple-- a characteristic of EKU. This system does not require a bottom track, and is suitable for ceiling mounting.
On Ceiling Surface ▼
|Application||Closet & Walk-In Closet, Storage▼|
|Number of Doors||2▼|
|Door Type||Aluminum Frame|
|Door Mounting Method||Concealed|
|Soft-Close System||One-Way Operation|
|Roller Type||Ball Bearing|
|Rail Finish||Satin Aluminum (10) Velo Clear|
|Rail Length||11 ft 5 in*|
|Weight Capacity per Door||Max. 220 lb*|
|Rail Material||Anodized Aluminum|
|Door Thickness||1 3/16 in*|
|Door Width||Max. 47 1/4 in*|
|Tempered Glass Door Thickness (ESG)||1/4 in*|
|Maximum Door Height||Max. 9 ft*|
|Packaging format||Per unit|
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
N.B. For soft closing in both directions, add 893102071 & 893114071 to your order. The distance between the rollers must be 22-7/16" center to center.
- Maximum width of the door: 1,200 mm
- Maximum height of the door: 2,750 mm
- An additional bottom guide with the track is recommended if your door width exceeds 900 mm.
Picture for visual reference only: actual product may vary from that shown in photo.
Be sure to order hardware before beginning fabrication or installation work.
Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes, modify quite produced or information without prior notice!
All technical and drawings documents contain examples for the assembly of different supplier hardware. The customer cannot derive any claims from the use of these documents. No responsibility is assumed for design details relating to the construction or project.
At any time the execution and installation must be done by qualified persons.
Never exceed the maximum weight or the maximum dimension recommended by the manufacturer.
Always make sure to fix properly the product using the right fixation for the proper material.
Never use any spray lubricant on these products.
Advantages and benefits
- Rails mount flush with the ceiling or on the surface.
- Simple customization of aluminum-framed doors.
- Aluminum-framed panels can combine wood and glass.
- Easy height adjustment with screwdriver.
- 1-, 2- and 3-track sliding solutions.
- Walk-in wardrobes
- Individualized interior design
The preceding information as well as any technical recommendation given in writing, verbally or based on tests are provided to the best of our knowledge.
However, they are non-binding recommendations only and do not affect your responsibility to determine the correctness of given recommendations and suitability of the product for your particular purposes.
The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore fall exclusively in your area of responsibility.
Sales of our products are subject to our most recent General Sales and Delivery Conditions.
Please note that Richelieu will not accept any returns or claims for unpackaged products.