EKU-CLIPO 15 GC - WEBKIT10001

Reduced door/frame space

Product number : WEBKIT10001
+   - Quantity

Included in this webkit

EKU-CLIPO 15 GC/GCG IS is designed for two top-running glass doors with the Inslide design, weighing up to 15 kg. The running track is groove-mounted and does not require a groove in the base. The glass, with a 26 mm diameter hole, is secured by clipping the running gear and the cover cap together. No panel to affect the appearance.

Operation Single Panel
Similar products
Number of Doors 1
Similar products
Application Furniture, Cabinet, Storage
Door Type Glass
Weight Capacity per Door Max. 33 lb
Door Installation Inset/Inlay
Tempered Glass Door Thickness 1/4 in*
Track Mounting Recessed - Inside the Cabinet
Rail Length 98 3/8 in*
Roller Position Upper
Soft-Close System Not Available
Door Mounting Method Drill
Roller Type Axel (Bushing)
Rail Material Aluminum
Rail Finish Mill Finish (M)
Milling 1 1/32 in*
Packaging format Per unit
* Disclaimer

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.

Suggested products

Advantages and benefits

- Tool-free assembly.
- Can be installed in 19 mm cabinet tops.
- Freely adjustable end stopper with retainer.
- Running and guide tracks for recess and screw mounting.

Application

- For private living, eating and sleeping areas
- Wall cabinets and base units in kitchens
- Sideboards
- Base units in bathrooms

Disclaimer

Note:
Picture for visual reference only: actual product may vary from that shown in photo.
Be sure to order hardware before beginning fabrication or installation work.
Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes, modify quite produced or information without prior notice!
All technical drawings and documents contain examples for the assembly of different supplier hardware. The customer cannot derive any claims from the use of these documents. No responsibility is assumed for design details relating to the construction or project.
At any time the execution and installation must be done by qualified persons.
Never exceed the maximum weight or the maximum dimension recommended by the manufacturer.
Always make sure to fix properly the product using the right fixation for the proper material.
Never use any spray lubricant on these products.
Always use a dry cloth to remove debris / dust / residues (sawdust and / or aluminum) from rails before installing hangers.


Disclaimer:
The preceding information as well as any technical recommendation given in writing, verbally or based on tests are provided to the best of our knowledge.
However, they are non-binding recommendations only and do not affect your responsibility to determine the correctness of given recommendations and suitability of the product for your particular purposes.
The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore fall exclusively in your area of responsibility.
Sales of our products are subject to our most recent General Sales and Delivery Conditions.
Please note that Richelieu will not accept any returns or claims for unpackaged products.

Recently viewed products