CCRMUS18
Replacement Blade for Scribing Tool Thingamejig
Product # 9110002
After continued use of your scribing tool, the blades will need to be changed. Accuracy cannot be guaranteed if non-genuine blades are used. The scribing tool has 9 blade tips, of which 3 are always exposed, so you can quickly change to another tip if one goes blunt. This prevents downtime due to blade changes. As required, simply undo the wrench screw holding the blade and rotate to an unused sharp point on each triangle blade. Remember not to over-tighten.
ADVANTAGES AND BENEFITS
Each set of 3 triangle blades gives you a total of 9 scribing tips.
IMPORTANT INFORMATION
Remember not to over-tighten.
The foot pad cover and tungsten carbide blades are only covered for defects occurred during manufacturing. These parts will wear with use and will need to be replaced. Damage to tungsten carbide blades as a result of over-tightening is not covered by the warranty.
The foot pad cover and tungsten carbide blades are only covered for defects occurred during manufacturing. These parts will wear with use and will need to be replaced. Damage to tungsten carbide blades as a result of over-tightening is not covered by the warranty.