Technical data sheet
Euro-Uniguide Drawer Guide
Product # GENELDG4
The Euro-Uniguide features a set of aluminum guide rails with four polycarbonate templates attached with thumb screws. Each template has a slot to accommodate ceramic composite drill guide bushings. The drill guide bushings can be located anywhere within the range of the slot, allowing the tool to be adjusted to match any brand of drawer guide hardware.
The templates are vertically adjustable to meet user requirements.
The Euro-Uniguide is designed to work with all brands of door slides that are side mounted. It has 1 1/4 in (32 mm) increments printed into the plastic templates with adjustable ceramic nylon bushings.
The templates are vertically adjustable to meet user requirements.
The Euro-Uniguide is designed to work with all brands of door slides that are side mounted. It has 1 1/4 in (32 mm) increments printed into the plastic templates with adjustable ceramic nylon bushings.
REQUIRED PRODUCTS
Requires the following products
TECHNICAL SPECIFICATIONS
Product #
GENELDG4
Type of Jig
For Slide Installation
Material
Aluminum, Plastic, Steel
Length
28.75 in
Width
11.75 in
Depth
1.5 in
Brand
Euro Limited
IMPORTANT INFORMATION
- Drill Guide Bushings: Ceramic nylon
- Rails: Extruded aluminum
- Templates: Lexan-polycarbonate plastic
- Rail Connectors: Chrome steel
- Knobs: Plastic with steel studs
- Color: Aluminum, Natural plastic, Grey
- Finish: Anodized aluminum, Matte plastic
- Size: 11.75" W x 1.5" D x 28.75" L (assembled)
Limited one year warranty. Please contact your Richelieu service center.
- Rails: Extruded aluminum
- Templates: Lexan-polycarbonate plastic
- Rail Connectors: Chrome steel
- Knobs: Plastic with steel studs
- Color: Aluminum, Natural plastic, Grey
- Finish: Anodized aluminum, Matte plastic
- Size: 11.75" W x 1.5" D x 28.75" L (assembled)
Limited one year warranty. Please contact your Richelieu service center.