Instructions
Recessed Magnetic Handle with Knob
Product # 89059460EC185
Handgrip is machined on both the inside and the outside to provide greater inner curvature and better grip for the fingers. Assembly is particularly easy and adaptable since the internal part consists of a plastic cylinder which can be easily cut to tailor it to the exact thickness of the door or shutter. Secure grip due to the internal curvature. The mounting system for the magnetic handle is really innovative. It can be easily adapted to thickness within a range of 30 mm to 65 mm, and the grooved inner section can be cut and adapted to the door in which it is to be used. Magnetic handles are composed of different parts that interact with one another and therefore cause greater wear and tear. To maintain the quality of finishes over time, they are applied to handles in the magnetic line by means of a special coating process that makes them extremely resistant both to scratches and UV exposure.
POLARISED NEODYMIUM MAGNETS
The magnets used in our flush handles are neodymium magnets with high coercive force, top quality magnets which, unlike others obtained using magnetised iron, never lose their physical properties.
POLARISED NEODYMIUM MAGNETS
The magnets used in our flush handles are neodymium magnets with high coercive force, top quality magnets which, unlike others obtained using magnetised iron, never lose their physical properties.
ADVANTAGES AND BENEFITS
- Neodymium magnet offers greater resistance over time compared to normal magnets.
- The grooved inner section can be cut and adapted to any door thickness ranging from 30 mm to 65 mm.
- The handgrip is machined on both the inside and the outside to provide greater inner curvature and better grip for the fingers.
- The grooved inner section can be cut and adapted to any door thickness ranging from 30 mm to 65 mm.
- The handgrip is machined on both the inside and the outside to provide greater inner curvature and better grip for the fingers.
TECHNICAL SPECIFICATIONS
Product #
89059460EC185
Door Type
Wood
Usage
Pocket Door, Sliding Door
Color/Finish
Satin Nickel
Door Thickness
1 3/8 to 2 9/16 in
Diameter
2 3/8 in*
Fixing Technique
Flush
Function
Passage
Milling Diameter
1 7/8 in*
Plate Style
Round
Material
Brass
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
IMPORTANT INFORMATION
Use on doors with standard drilling.
Note: Picture for visual reference only: actual product may vary from that shown in photo. Be sure to order hardware before beginning fabrication or installation work. Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes or modify information without prior notice. All technical drawings and documents contain examples of the assembly of different suppliers' hardware. The customer cannot base any claims on the use of these documents. No responsibility is assumed for design details relating to a particular construction project. At all times, execution and installation must be undertaken by qualified persons. Never exceed the maximum weight or the maximum dimensions recommended by the manufacturer. Always be sure to install the product correctly using the right fasteners for your materials. Never use any spray lubricant on these products.
Note: Picture for visual reference only: actual product may vary from that shown in photo. Be sure to order hardware before beginning fabrication or installation work. Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes or modify information without prior notice. All technical drawings and documents contain examples of the assembly of different suppliers' hardware. The customer cannot base any claims on the use of these documents. No responsibility is assumed for design details relating to a particular construction project. At all times, execution and installation must be undertaken by qualified persons. Never exceed the maximum weight or the maximum dimensions recommended by the manufacturer. Always be sure to install the product correctly using the right fasteners for your materials. Never use any spray lubricant on these products.
DISCLAIMER
The preceding information, as well as any technical recommendations given in writing, verbally or based on tests, is provided to the best of our knowledge. However, they are non-binding recommendations only and do not affect your responsibility to determine the correctness of given recommendations and suitability of the product for your particular purposes. The application, use, or processing of our products, as well as the production of products based on our technical recommendations are beyond our control and therefore fall exclusively in your area of responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.
