Line art
BUTTERFLY - Table Mechanism
Product # 651043430
Transform your coffee table into a dining table for 6 people!
The "Butterfly" mechanism is the smart solution for transforming a small everyday table into a large dining table that seats 6 people comfortably.
Table top: 25 mm (63/64") thick material.
Table top dimension:
Coffee table: two choices: 80 cm x 80 cm (31 1/2" x 31 1/2") or 90 cm x 90 cm (35 7/16" x 35 7/16 ")
Converts into a dining table: two choices: 1.6 m x 80 cm (5 ft 2 in x 31 1/2 in) or 1.8 m x 90 cm (5 ft 10 in x 35 7/16 in)
The mechanism opens up by pulling up the upper cover and putting it down on the smaller cover that automatically comes out from inside the box.
Hardware included.
Table top: 25 mm (63/64") thick material.
Table top dimension:
Coffee table: two choices: 80 cm x 80 cm (31 1/2" x 31 1/2") or 90 cm x 90 cm (35 7/16" x 35 7/16 ")
Converts into a dining table: two choices: 1.6 m x 80 cm (5 ft 2 in x 31 1/2 in) or 1.8 m x 90 cm (5 ft 10 in x 35 7/16 in)
The mechanism opens up by pulling up the upper cover and putting it down on the smaller cover that automatically comes out from inside the box.
Hardware included.
ADVANTAGES AND BENEFITS
This table has two functions: coffee table or dining table.
REQUIRED PRODUCTS
Requires the following products
TECHNICAL SPECIFICATIONS
Product #
651043430
Finish
Black (90)
Load Capacity
132 lb*
Material
Steel
Length
26 1/8 in*
Width
5 29/32 in*
Opening Mechanism
Spring
Expansion Capability
19 7/8 in*
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
APPLICATION
The perfect two-in-one:
- Coffee table: dimensions: 80 cm x 80 cm (31-1/2" x 31-1/2") or 90 cm x 90 cm (35-7/16" x 35-7/16")
- Dining table: dimensions:160 cm x 80 cm (63" x 31-1/2") or 180 cm x 90 cm (70-3/4" x 35-7/16")
- Coffee table: dimensions: 80 cm x 80 cm (31-1/2" x 31-1/2") or 90 cm x 90 cm (35-7/16" x 35-7/16")
- Dining table: dimensions:160 cm x 80 cm (63" x 31-1/2") or 180 cm x 90 cm (70-3/4" x 35-7/16")
INCLUDED PRODUCT(S)
Included in the box:
1- Right mechanism
1- Left mechanism
2- Springs
24- Screws
24- Pegs
2- Spring Tension Pins
1- Right mechanism
1- Left mechanism
2- Springs
24- Screws
24- Pegs
2- Spring Tension Pins
IMPORTANT INFORMATION
The mechanism has a main side and a secondary side, where the unfolded half of the table top rests.
The table top intended for this construction is made in 25 mm thick material. If a thinner material is used, two spacers of the difference have to be used on the lower side of the mechanism.
Use the insertable nuts and the screws supplied with the mechanism to ensure a strong connection between the mechanism and the table construction itself.
For the articulation of the table top, use 3 concealed hinges #429208145.
To facilitate the lifting of the superior top half, use edge inserted handles.
Don't load more than 60 kg onto the table, when open in the high unfolded position.
The table top intended for this construction is made in 25 mm thick material. If a thinner material is used, two spacers of the difference have to be used on the lower side of the mechanism.
Use the insertable nuts and the screws supplied with the mechanism to ensure a strong connection between the mechanism and the table construction itself.
For the articulation of the table top, use 3 concealed hinges #429208145.
To facilitate the lifting of the superior top half, use edge inserted handles.
Don't load more than 60 kg onto the table, when open in the high unfolded position.