Instructions
SPACE STEP Sets
Product # WEBKIT1231421
A new type of storage space
With SPACE STEP, you can not only plan taller furniture, but also create a new additional storage space in the base area.
| Product # | Length |
|---|---|
| WEBKIT1231421 | 16 1/8 in* |
| WEBKIT1231422 | 18 1/8 in* |
INCLUDED IN THIS WEBKIT
TECHNICAL SPECIFICATIONS
Product #
WEBKIT1231421
Load Capacity
331 lb*
Standards and Certifications
EN-14183
Slide Mounted
Side Mounted
Application
Furniture Drawer
BLUM Technology
Blumotion
Brand
Blum
Motion Technology
Soft-Close
BLUM Height
K, M, N
Product Line
LEGRABOX
Drawer Use
Standard
Cabinet Model
Framed, Frameless
Configuration
Boxcover with Lateral Inserts
Side
Both
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
IMPORTANT INFORMATION
- Material recommendation: a multi-layer board at least 27/32 in (21 mm) thick is recommended for the toe kick.
- An anti-slip surface is recommended. This can take the form of an anti-slip mat directly affixed to the step surface or by using anti-slip panel material.
- Only 66 lb or 88 lb (30 kg or 40 kg) runners may be used. The dynamic carrying capacity for the pull-out underneath the SPACE STEP is 44 lb (20 kg).
- An anti-slip surface is recommended. This can take the form of an anti-slip mat directly affixed to the step surface or by using anti-slip panel material.
- Only 66 lb or 88 lb (30 kg or 40 kg) runners may be used. The dynamic carrying capacity for the pull-out underneath the SPACE STEP is 44 lb (20 kg).
INCLUDED PRODUCT(S)
2 TANDEM 561Hxxx1B95
2 vertical supports
2 corner connectors
2 support feet
2 rear panel brackets
1 front connector set (magnet and catch plate)
4 spring bumpers*
2 stickers (safety information and manufacturer information)
14 flat headed screws, 4 x 19/32 in (15 mm)
1 installation instructions
*Recommendation: KB > 35 7/16 in (900 mm), four pieces
KB: cabinet width
LW: internal cabinet width
2 vertical supports
2 corner connectors
2 support feet
2 rear panel brackets
1 front connector set (magnet and catch plate)
4 spring bumpers*
2 stickers (safety information and manufacturer information)
14 flat headed screws, 4 x 19/32 in (15 mm)
1 installation instructions
*Recommendation: KB > 35 7/16 in (900 mm), four pieces
KB: cabinet width
LW: internal cabinet width
