Instructions
OPLA-TOP Table Extension Mechanism
Product # 4117171010
Side table that expands counter top work space
ADVANTAGES AND BENEFITS
Optimizes workspace in a small kitchen.
Hidden in a cabinet when not in use (takes the space normally used by a drawer).
Designed to be installed in a cabinet with an exterior width of 450 mm to 900 mm (17-3/4" to 35-7/16").
The top panel of the table must be made by the client.
Color: aluminum.
Hidden in a cabinet when not in use (takes the space normally used by a drawer).
Designed to be installed in a cabinet with an exterior width of 450 mm to 900 mm (17-3/4" to 35-7/16").
The top panel of the table must be made by the client.
Color: aluminum.
TECHNICAL SPECIFICATIONS
Product #
4117171010
Solutions
Countertops and Accessories
Area of Activity
Preparation, Cooking
Interior Dimensions Required - Width
16 1/4 to 33 7/8 in*
Interior Dimensions Required - Depth
Min. 20 7/8 in*
Interior Dimensions Required - Height
Min. 4 23/32 in*
Capacity
88.2 lb*
Extension
20 7/8 in*
Finish
Anodized Aluminum
Material
Aluminum
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
APPLICATION
Complete system, only the top panel must be made by the client, which enables harmonization with the counter.
Once the mechanism is folded out, the panel adjusts to the same height as the counter.
Aluminum rail with high-load capacity of 40 kg (88 lb), evenly distributed.
Can be installed in place of a drawer, behind the hinged front panel that tilts towards the back enabling the table to slide out of the cabinet.
Because it does not have a front bar, it is convenient for all sizes from 450 mm to 900 mm (17-3/4" to 35-7/16").
Approximate total extension of the table: 500 mm (19-11/16").
Once the mechanism is folded out, the panel adjusts to the same height as the counter.
Aluminum rail with high-load capacity of 40 kg (88 lb), evenly distributed.
Can be installed in place of a drawer, behind the hinged front panel that tilts towards the back enabling the table to slide out of the cabinet.
Because it does not have a front bar, it is convenient for all sizes from 450 mm to 900 mm (17-3/4" to 35-7/16").
Approximate total extension of the table: 500 mm (19-11/16").
