Datasheet
T-ABLE XL III Table Extension Mechanism 4119 Series
Product # 4119192210
Box
Functional side table, ready instantly
ADVANTAGES AND BENEFITS
Optimizes space in a small kitchen.
Hidden in a cabinet when not in use (takes the space normally used by a drawer).
Double solution when combined with the extensible T-Bench n° 4117194510.
Designed to be installed in a cabinet with an exterior width of 600 mm.
The top panel of the table must be made by the client.
Color: aluminum.
Hidden in a cabinet when not in use (takes the space normally used by a drawer).
Double solution when combined with the extensible T-Bench n° 4117194510.
Designed to be installed in a cabinet with an exterior width of 600 mm.
The top panel of the table must be made by the client.
Color: aluminum.
TECHNICAL SPECIFICATIONS
Product #
4119192210
Solutions
Countertops and Accessories
Area of Activity
Preparation, Cooking
Interior Dimensions Required - Width
22 to 22 1/2 in*
Interior Dimensions Required - Depth
Min. 20 1/2 in*
Interior Dimensions Required - Height
Min. 5 29/32 in*
Capacity
220 lb*
Extension
51 5/8 in*
Finish
Anodized Aluminum
Material
Aluminum
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
APPLICATION
Complete system, only the top panel must be made by the client, which enables harmonization with the counter.
Aluminum steel rail with high-load capacity of 100 kg (200 lb), evenly distributed.
Can be installed in place of a drawer, behind the hinged front panel that tilts towards the back enabling the table to tilt towards the cabinet.
Sturdy, extendable and collapsible aluminum legs.
Top, front table panels insert into dowels that hold them firmly in place.
The back panel is fixed.
Suitable for widths of 600 mm (23-5/8").
Approximate total extension of the table: 1,310 mm (51-9/16").
Aluminum steel rail with high-load capacity of 100 kg (200 lb), evenly distributed.
Can be installed in place of a drawer, behind the hinged front panel that tilts towards the back enabling the table to tilt towards the cabinet.
Sturdy, extendable and collapsible aluminum legs.
Top, front table panels insert into dowels that hold them firmly in place.
The back panel is fixed.
Suitable for widths of 600 mm (23-5/8").
Approximate total extension of the table: 1,310 mm (51-9/16").
IMPORTANT INFORMATION
Lateral panel thickness varies between 15 mm and 20 mm (from 19/32" to 25/32"). Spacers are included to adjust the mechanism to the interior width.
