Under sink cabinet protection tray
|Product number||Interior Dimensions Required - Width||Finish||Product Dimensions - Width|
|SBDT2730S1||25 1/2 to 28 1/2 in||Silver Gray||28 1/2 in|
|SBDT3336S1||31 1/2 to 34 1/2 in||Silver Gray||34 1/2 in|
|SBDT3942S1||37 1/2 to 40 1/2 in||Silver Gray||40 1/2 in|
|SBDT2730A1||25 1/2 to 28 1/2 in||Almond||28 1/2 in|
|SBDT2730OG1||25 1/2 to 28 1/2 in||Orion Gray||28 1/2 in|
|SBDT3336A1||31 1/2 to 34 1/2 in||Almond||34 1/2 in|
|SBDT3336OG1||31 1/2 to 34 1/2 in||Orion Gray||34 1/2 in|
|SBDT3942A1||37 1/2 to 40 1/2 in||Almond||40 1/2 in|
|SBDT3942OG1||37 1/2 to 40 1/2 in||Orion Gray||40 1/2 in|
Molded polymer (plastic) designed for durability.
This protection tray is your first line of defense against under sink kitchen cabinet damage from minor leaks. The unique design not only protects the bottom of your cabinet by holding water the tray actually funnels excessive water to the front of your cabinet and out onto the floor alerting you of the leak. Installed in the bottom of your cabinet. Designed for installation in NEW 30 in 762mm), 36 in (914mm) or 42 in (1067mm) external cabinet width.
RECOMMENDED TO BE USED FOR INSTALLATION INSIDE NEW CABINETS
Product can be installed to existing cabinet, but may require modification to fit around existing plumbing (please check installation instructions).
Product can be trim to a custom fit using standard utility knife, maximum trim size: 3'' in width (1-1/2'' on both sides) X 1 3/4'' in depth (at the back)
They are easy clean up and resistant to most household chemicals.
Rev A Shelf limited lifetime warranty