Instructions
CAPSENS - Dimmer for LED 12V and 24V
Product # 152126003
Invisible Dimmer Switch!
- A hidden electronic touch-sensitive sensor switch designed to be applied to the back side of the surfaces (e.g., wood, plastic, glass, and other opaque or transparent nonmetal materials).
- Operates at a very low safety voltage.
- Operates at a very low safety voltage.
ADVANTAGES AND BENEFITS
- Quick touch for on/off, long touch for light intensity (dimmer function).
- Features a memory setting. Once you find your favorite setting and then power down your lights, the next time you turn them on CapsSens will remember your last-used setting.
- Has automatic shutdown after 18 hours of continuous usage, a built-in safety feature.
- Integrated "soft-start" and "soft-stop" function.
- Features a memory setting. Once you find your favorite setting and then power down your lights, the next time you turn them on CapsSens will remember your last-used setting.
- Has automatic shutdown after 18 hours of continuous usage, a built-in safety feature.
- Integrated "soft-start" and "soft-stop" function.
REQUIRED PRODUCTS
Requires ONE of the following products
OR
TECHNICAL SPECIFICATIONS
Product #
152126003
Lighting Type
LED
Control System
Touch
Operation
Touch
Tension (V)
24 V, 12 V
Style
Contemporary
Finish
Black
Mounting
Surface
Watts
30 W
Height
10 mm
Width
2 mm
Diameter
50 mm
IP
IP44
Group
LED Group A, LED 24 V dc Exclusive
Bore Hole
38 mm
Features
Dimmable, Touch Function, Round
APPLICATION
CapsSens cannot be installed on metallic surfaces. For other materials, like granite, it depends on the composite materials and it is recommended that you make a preliminary test.
IMPORTANT INFORMATION
- Compatible with 12 V (30 W) and 24 V (60 W) LED devices
- Activation area: approximately 50 mm diameter
- Protection degree: IP44
- To be used with the follow materials:
- Wood: maximum thickness of 30 mm
- Plexiglass: maximum thickness of 20 mm
- Glass: maximum thickness of 12 mm
- How it works:
- To switch on/off without making physical contact with the switch but only by touching the surface where it is installed.
- To increase or decrease the light intensity (dimming function) just press the surface and hold until the right level of light is reached.
- A short flash indicates that CapsSens has reached maximum light intensity.
- Activation area: approximately 50 mm diameter
- Protection degree: IP44
- To be used with the follow materials:
- Wood: maximum thickness of 30 mm
- Plexiglass: maximum thickness of 20 mm
- Glass: maximum thickness of 12 mm
- How it works:
- To switch on/off without making physical contact with the switch but only by touching the surface where it is installed.
- To increase or decrease the light intensity (dimming function) just press the surface and hold until the right level of light is reached.
- A short flash indicates that CapsSens has reached maximum light intensity.
