Line art
Complete 3-Step Plug & Play Dimmer Kit
Product # 1551170
Touch step dim function / Class I
Recess the included metal touch switch knob (brushed nickel finish) in a convenient, easy-to-reach location and control your new high-powered 3W LED lights like never before!
Touch once and the lights are activated to 30% intensity. Touch again to reach 60% intensity, and a third time for 100% intensity. One last touch, and the lights turn off.
Touch once and the lights are activated to 30% intensity. Touch again to reach 60% intensity, and a third time for 100% intensity. One last touch, and the lights turn off.
ADVANTAGES AND BENEFITS
- Only one item to order for the 3-step touch dimming function for up to 6 lights of Invoke (155121170/155122170/155121090/155122090) or Pro (156121170/156122170) or with Swivel (154121170/154122170).
- Easy installation.
- One item to order with an easy quick-connect system.
- Easy installation.
- One item to order with an easy quick-connect system.
REQUIRED PRODUCTS
Requires the following products
AND
AND
TECHNICAL SPECIFICATIONS
Product #
1551170
Lighting Type
LED
Finish
Black, Satin Nickel
Watts
18 W
Standards and Certifications
UL
Control System
Touch
Price Point
Optimum
Tension (V)
24 V
Operation
Touch
Features
Dimmable, Touch Function
INCLUDED PRODUCT(S)
Kit as shown includes power supply for 1 to max. 6 lights, terminal for plugging in 1 to 6 lights from the Invoke or Pro line of lights, and one 3-step touch-sensitive knob/dimmer.
IMPORTANT INFORMATION
Power supply:
- Input: 100-240 Vac 50/60 Hz
- Output: 3-21 Vdc 700mA constant current
- 70" (6') power cord
- Input: 100-240 Vac 50/60 Hz
- Output: 3-21 Vdc 700mA constant current
- 70" (6') power cord
DISCLAIMER
When installing the dimmer switch please take extra consideration for the touch sensitive (yellow) wire:
* Ensure it is not installed in a confined manner (i.e. with other wires in an encasement) as heat can build up
* That it is not kinked in any way
* That it is not damaged, nicked or fastened in any way as to cause a nick or damage to the wire/casing. Please route touch sensitive (yellow) wire so that it will not be damaged or pinched when the cabinet is installed (pushed to the wall)
* Please only use insulated staples or plastic ties to secure cord and do not use metal staples or ties as it can interfere with the touch sensitive (yellow) wire
NOTE: IF any of the above takes place it can affect the performance of the dimmer switch
- All unused power supply output plugs must have jumpers installed.
- Always connect the LED light to the power supply first and then connect the power supply to the mains; failure to do so may cause damage to the existing diode.
* Ensure it is not installed in a confined manner (i.e. with other wires in an encasement) as heat can build up
* That it is not kinked in any way
* That it is not damaged, nicked or fastened in any way as to cause a nick or damage to the wire/casing. Please route touch sensitive (yellow) wire so that it will not be damaged or pinched when the cabinet is installed (pushed to the wall)
* Please only use insulated staples or plastic ties to secure cord and do not use metal staples or ties as it can interfere with the touch sensitive (yellow) wire
NOTE: IF any of the above takes place it can affect the performance of the dimmer switch
- All unused power supply output plugs must have jumpers installed.
- Always connect the LED light to the power supply first and then connect the power supply to the mains; failure to do so may cause damage to the existing diode.
