C-2025 Kit for doors up to 1 3/8" (35 mm)

To buy, choose from the options below.
Number of Doors: 2 4 Track Length: 48 in 60 in 72 in 96 in Packaging format: Length of 4 linear foot Length of 5 linear foot Length of 6 linear foot Length of 8 linear foot Select Options
Product number Number of Doors Track Length Packaging format
KN2548 2 48 in Length of 4 linear foot
KN2560 2 60 in Length of 5 linear foot
KN2572 2 72 in Length of 6 linear foot
KN2596 4 96 in Length of 8 linear foot


Light use

Either 3/4" or 1-3/8" doors may be used by simply interchanging the hanger mounting. Slotted holes in the hangers allow vertical adjustment.


Track Mounting
Ceiling Mount
Door Material
Weight Capacity per Door
Max. 60 lb
Door Mounting Method
Roller Type
Axle (Bushing)
Roller Position
Door Position
Inside Frame
Door Thickness
3/4 to 1 3/8 in
Track Material
Track Finish
Mill Finish
K.N. Crowder



Picture for visual reference only: actual product may vary from that shown in photo.
Be sure to order hardware before beginning fabrication or installation work.
Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes, or modify information without prior notice!
All technical and drawings documents contain examples for the assembly of different supplier hardware. The customer cannot derive any claims from the use of these documents. No responsibility is assumed for design details relating to the construction or project.
At any time the execution and installation must be done by qualified persons.
Never exceed the maximum weight or the maximum dimension recommended by the manufacturer.
Always make sure to fix properly the product using the right fixation for the proper material.
Never use any spray lubricant on these products.
Always remove debris / dust / residues (sawdust and / or aluminum) from track before installing hangings using a dry cloth.


The preceding information as well as any technical recommendation given in writing, verbally or based on tests are provided to the best of our knowledge. However, they are non-binding recommendations only and do not affect your responsibility to determine the correctness of given recommendations and suitability of the product for your particular purposes. The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore fall exclusively in your area of responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.
C-2025 Kit for doors up to 1 3/8" (35 mm)

To buy, choose from the options.