Integrail Sliding Door System

Product #: 8916603170


Flat bar running rail with z-design connecting ends

The Integrail top-mounted sliding door hardware provides a functional, versatile and secure sliding door solution with a discreet design!
Our flat bar running rail, with its z-design connecting ends, allows for a virtually seamless operation and the installation of a hidden soft-close system.
A sure-fire easy installation with fixation points pre-drilled in the running rail for 16" centers.
As opposed to being mounted on brackets, the system is affixed directly to the wall through the running rail with the combination of spacing sleeves and our lift-locking pin. It therefore eliminates the risk of your door shifting or coming off the track, rendering your space safe for all.


Product number
Track Mounting
Wall Mount
Door Material
Stainless Steel (170)
Weight Capacity per Door
Max. 80 kg
Groove Needed for Guiding System
Number of Doors
Door Width
28 to 34 in
Door Thickness
35 to 45 mm
Roller Type
Ball Bearing
Roller Position
Track Type
Flat Bar
Track Material
Stainless Steel
Track Finish
Stainless Steel
Track Length
67 7/8 in
Door Mounting Method
Displayed in These Showrooms


  • Running and Guiding Tracks for Sliding Door Systems
  • Soft-Close Mechanisms for Sliding Door Systems


- Pre-drilled running rails for 16" centers.
- Depending on the size of your door, the soft-close system can be installed on either side, or both sides and is hidden out of sight between the running rail and the wall.
- Endless custom possibilities with the use of optional rail connector kits.


Hotel room, bedroom, office.


With custom spacing sleeves of 11 mm to 32 mm long, your door can be mounted at various distances from the wall to allow enough space for framing, moldings, etc.
Designed for wood doors, weighing up to 176 lb (80 kg) when installed in the position closest to the wall.
Weight capacity will be reduced depending on the sleeve combination used.
Designed for doors ranging in width from 28" to 34" (up to 48'' with the optional Rail Connector set).
The use of a laser level or a 4' spirit level is recommended.

Picture is for visual reference only: actual product may vary from that shown in photo.
Be sure to order hardware before beginning fabrication or installation work.
Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes or modify information without prior notice.
All technical drawings and documents contain examples for the assembly of different supplier's hardware. The customer cannot make any claims based on the use of these documents. No responsibility is assumed for design details relating to the construction or project.
At all times, execution and installation must be undertaken by qualified persons.
Always make sure to install the product carefully using the appropriate fixation for your material.
Never exceed the maximum weight or the maximum dimensions recommended by the manufacturer.
Never use any spray lubricant on these products.
Use a dry cloth to remove fragments, dust, and residue (sawdust and/or aluminum) from rails before the installation of the hangers.


The preceding information as well as any technical recommendations given in writing, verbally or based on tests are provided to the best of our knowledge. However, they are non-binding recommendations only and do not affect your responsibility to determine the correctness of given recommendations and suitability of the product for your particular purposes. The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore fall exclusively in your area of responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.
Integrail Sliding Door System

Product number: 8916603170