The Classic Barn Door Set

Product #: 246015170

Description

Hardware kit for a single sliding door

The Classic Barn Door is a wall mount sliding door system for 1 wood door with visible stainless steel flat bar steel top mount trolley for doors weighing up to 80 kg (176 lb). Select from 3 choices of standard flat bar upper track sets with wall mounts and fastener lag bolts for wood wall construction. Each track is pre-drilled for connectors to join tracks and soft-close mechanisms (sold separately). For residential applications.

REQUIRED PRODUCTS

Requires ONE of the following products

Flat Rail, Stainless Steel Product no. 246003170
  • Track Length: 3 m
  • Number of Doors: 2 / 1
Box
OR
Flat Rail, Stainless Steel Product no. 246011170
  • Track Length: 2 m
  • Number of Doors: 1
Box
OR
Flat Rail, Stainless Steel Product no. 246012170
  • Track Length: 2.5 m
  • Number of Doors: 2 / 1
Box

TECHNICAL SPECIFICATIONS

Product number
246015170
Track Mounting
Wall Mount
Door Material
Wood
Style
Rustic
Finish/Color
Stainless Steel (170)
Weight Capacity per Door
15 to 80 kg
Material
Stainless Steel
Groove Needed for Guiding System
Yes
Groove Width at the Bottom of Door
7 mm
Groove Depth
20 mm
Number of Doors
1
Door Width
24 to 60 in
Door Thickness
1 3/8 to 1 3/4 in
Roller Type
Ball Bearing
Roller Position
Upper
Track Type
Flat Bar
Track Length
2 to 3 m
Soft-Closing
No
Door Mounting Method
Screw
Brand
Onward

ADVANTAGES AND BENEFITS

Allows you to install two sets (doors) on the same rail.

Security: The system is equipped with an anti-derailment device for each bearing support to prevent the door from stalling when misused.

INCLUDED PRODUCT(S)

- 2 roller units with screws for 1-3/8" or 1-3/4" door
- 2 end-bumpers with screws
- 2 anti-derailer units with screws
- 1 floor-level door guide with screws

IMPORTANT INFORMATION

Note:
Picture for visual reference only: actual product may vary from that shown in photo.

Be sure to order hardware before beginning fabrication or installation work.

Always use manufacturer-provided instructions as manufacturer reserves the right to make technical changes and modify information without prior notice.

All technical drawings and documents contain examples for the assembly of different supplier hardware. The customer cannot derive any claims from the use of these documents. No responsibility is assumed for design details relating to the construction or project.

Installation should be undertaken by qualified persons.

Never exceed manufacturer-recommended maximum weight or dimensions.

Ensure product is correctly installed using anchors that are appropriate for the supporting material.

Never use spray lubricant on this product.à

DISCLAIMER

The preceding information as well as any technical recommendation given in writing, verbally or based on tests is provided to the best of our knowledge. However they are non-binding recommendations only, and do not affect your responsibility to determine the correctness of given recommendations and suitability of the product for your particular purposes. The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore fall exclusively in your area of responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.
The Classic Barn Door Set

Product number: 246015170

Box