Zenitude - Decorative Visible Rail System

Product #: 246016SSPVC


Interior Barn Door

Complete steel hardware kit with 78 in (2 m) track set for the easy installation of a regular wood door weighing up to 220 lb (100 kg) each. The tracks are perforated at the ends so that they can be joined with a connector plate. Ideal for applications for extra wide doors and biparting applications.
Available soft-close mechanism (sold separately) for doors weighing up to 176 lb (80 kg).


Product number
Track Mounting
Wall Mount
Door Material
Stainless Steel (170)
Weight Capacity per Door
15 to 100 kg
Stainless Steel
Groove Needed for Guiding System
Groove Width at the Bottom of Door
5 to 7 mm
Groove Depth
20 mm
Number of Doors
Door Width
24 to 40 in
Door Thickness
1 3/8 to 1 3/4 in
Roller Type
Ball Bearing
Roller Position
Track Type
Flat Bar
Track Material
Stainless Steel
Track Finish
Stainless Steel
Track Length
2 m
Door Mounting Method


  • Handles for Sliding Barn Doors
  • Door Guides for Sliding Door Systems
  • Running and Guiding Tracks for Sliding Door Systems
  • Mounting Accessories
  • Adjustment Tools and Accessories for Sliding Door Systems
  • Soft-Close Mechanisms for Sliding Door Systems
  • Mounting Brackets for Sliding Door Systems
  • Recessed and Flush Cup Pulls for Sliding Doors
  • Door Retainer


Ball-bearing rollers for smooth and quiet operation.

Rails are pre-drilled at every 450 mm for the installation of 5 wall-mount brackets and at each end to allow for interconnection with other rails or the installation of soft-close mechanism.

Security: each roller unit is equipped with a device that prevents derailment during rough use of the door.


Interior access door.


1 two-meter rail (flat bar)
2 single roller supports for 1-3/8" or 1-3/4" door
2 end-bumpers
5 wall-mount brackets
2 anti-derailment pieces
1 door bottom guide

Screws are included


Door handles and door not included. It is recommended to use a solid or glass door in order to obtain the minimum weight to reduce noise resonance. Use a wider door than the opening to avoid angled views and preserve privacy. For example, it is recommended to use a door 34" wide for an opening of 30". The bottom of the door requires a groove for the concealed guiding system. Preparation: Remove the frame moldings or install a piece of wood (not included) of the same thickness and length before setting the new hardware in place to ensure there is enough clearance for the door. Always make sure that the product is properly attached or installed using appropriate fixings material. An additional anchor may be required for installation (sold separately).

Picture for visual reference only: actual product may vary from that shown in photo.
Be sure to order hardware before beginning fabrication or installation work.
Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes or modify information without prior notice.
All technical and drawings documents contain examples for the assembly of different supplier hardware. The customer cannot derive any claims from the use of these documents. No responsibility is assumed for design details relating to the construction or project.
The execution and installation must always be done by qualified persons.
Never exceed the maximum weight or the maximum dimension recommended by the manufacturer.
Ensure product is correctly installed using anchors that are appropriate for the supporting material.
Never use any spray lubricant on these products.
Always use a dry cloth to remove debris/dust/residues (sawdust and/or aluminum) from rails before installing hangers.


The above information and our technical advice on the implementation given in writing, verbally, or in the form of tests is for information purposes only based on the most reliable information available. These recommendations do not relieve you of the responsibility to verify the accuracy of data and the applicability of products to the intended purpose. The application, use, and processing of our products and the realization of your projects under our technical recommendations are beyond our control and therefore at your own risk. The sale of our products is subject to our Terms of Sale that are in force. Please note that Richelieu will refuse any return or claim for a non-packaged product.
Zenitude - Decorative Visible Rail System

Product number: 246016SSPVC