GV Suspension Profile for Glass, HAWA
Product # 65919868GV
For Variofold, Centerfold and Variotec
The GV Suspension Profile is for HAWA sliding glass door systems in the Junior, Variofold/Centrefold and Variotec series. Accepts a wide range of glass thicknesses. Select the correct glass fixing set options for your application. Brushed anodized finish on aluminum.
REQUIRED PRODUCTS
Requires ONE of the following products
OR
TECHNICAL SPECIFICATIONS
Product #
65919868GV
Product type
Decorative Hardware
Door Material
Glass
Finish
Bronze Anodized Aluminum
Compatible with
Hawa Variotec, Hawa Variofold and Centerfold
Load Capacity
88.2 to 353 lb*
Overall Height
4 1/8 in*
Width
1 13/32 in*
Overall Length
47 1/4 in*
Door Movement
Folding
Door Thickness
7/16 to 1/2 in*
Detailed Door Movement
Center Folding
Application
Movable Glass Wall
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
SUGGESTED PRODUCTS
- Decorative Accessories
- Door Guides for Sliding Door Systems
- Accessories for Movable Walls
- Hardware Sets
- Mortice Locks, Latches and Striker Plates for Sliding Doors
IMPORTANT INFORMATION
- Please read the entirety of the installation manual before proceeding with installation.
- Wear safety gear such as gloves, safety glasses, safety shoes and ear protection
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residue (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure.
- Wear safety gear such as gloves, safety glasses, safety shoes and ear protection
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residue (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure.
DISCLAIMER
Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
