CONCEPTA Guide Roller
Product # 189S25656
guide door
The CONCEPTA Guide Roller is for the top and/or bottom of the vertical front profile for the retractable scissor action mechanism. The guide roller travels within the bottom guide channel and the upper running track for the Hawa Concepta 25 & 30. The guide roller contacts the side walls for the channel and track but must not make contact with the bottom or ceiling of the channel and track.
TECHNICAL SPECIFICATIONS
Product #
189S25656
Product type
Door Guide
Door Material
Wood
Door Thickness
3/4 to 1 31/32 in*
Load Capacity
33.1 to 110 lb*
Manufacturing Material
Aluminum, Plastic
Brand
Concepta, Folding Concepta
Door Movement
Straight Sliding
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
IMPORTANT INFORMATION
IMPORTANT:
* The guide roller contacts the side walls for the channel and track but must not make contact with the bottom or ceiling of the channel and track.
* Refer to the Hawa Planning Tool calculator to determine the location
* Use metric dimensions for greater accuracy during installation.
* Please make sure to read the entirety of the installation manual before proceeding with the installation.
* Use metric dimensions for greater accuracy during installation
* wear safety gear such as gloves, safety glasses, safety shoes, and ear protection
* Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
* Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
* Never spray lubricant on this product.
* Do not exceed stated limitations and parameters. This will cause early wear and performance failure.
* The guide roller contacts the side walls for the channel and track but must not make contact with the bottom or ceiling of the channel and track.
* Refer to the Hawa Planning Tool calculator to determine the location
* Use metric dimensions for greater accuracy during installation.
* Please make sure to read the entirety of the installation manual before proceeding with the installation.
* Use metric dimensions for greater accuracy during installation
* wear safety gear such as gloves, safety glasses, safety shoes, and ear protection
* Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
* Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
* Never spray lubricant on this product.
* Do not exceed stated limitations and parameters. This will cause early wear and performance failure.
