Arauco - Trupan MDF Panel

To buy, choose from the options below.
Length: 88 in 97 in 109 in 121 in 145 in Width: 49 in 61 in Thickness: 6 mm 1/4 in 3/8 in 1/2 in 5/8 in 3/4 in 1 in 1 1/8 in Select Options
Product number Length Width Thickness
N3235571 88 in 61 in 3/8 in
N3220480 97 in 49 in 6 mm
N3250480 97 in 49 in 1/2 in
N3255480 97 in 49 in 5/8 in
N3265480 97 in 49 in 3/4 in
N3275480 97 in 49 in 1 in
N3230580 97 in 61 in 1/4 in
N3235580 97 in 61 in 3/8 in
N3255580 97 in 61 in 5/8 in
N3265580 97 in 61 in 3/4 in
N3280580 97 in 61 in 1 1/8 in
N3235590 109 in 61 in 3/8 in
N3250590 109 in 61 in 1/2 in
N3255590 109 in 61 in 5/8 in
N3265590 109 in 61 in 3/4 in
N3275590 109 in 61 in 1 in
N3230600 121 in 61 in 1/4 in
N3235600 121 in 61 in 3/8 in
N3250600 121 in 61 in 1/2 in
N3255600 121 in 61 in 5/8 in
N3265600 121 in 61 in 3/4 in
N3280600 121 in 61 in 1 1/8 in
N3250650 145 in 61 in 1/2 in
N3255650 145 in 61 in 5/8 in
N3265650 145 in 61 in 3/4 in
N3275650 145 in 61 in 1 in

Description

Trupan Standard MDF is a versatile product that will fit most general industrial uses including cabinets, fixtures, and furniture components. An advanced refining process ensures a homogeneous panel that is ideal for deep detailed profiling and finishing with exceptional performance results.

TECHNICAL SPECIFICATIONS

Material
MDF
Collection
MDF
Panel Type
Trupan
Finish
Unfinished
Panel Type
Trupan

APPLICATION

- EPA TSCA Title VI certified - TPC 1.
- Complies with formaldehyde emission requirements in MDF for CAN/CSA-0260-16, CPA-ECC-2011, ANSI 208.2-2016, and CCR 93120 (CARB Composite Wood ATCM Phase II).
- All panels are approved for interior, non-structural application.
- Contains recycled/recovered wood content.

DISCLAIMER

Storage and handling: Trupan MDF products should never be stored or used outdoors. The indoor storage area should be clean, dry, well-ventilated, and free of dust, dirt, or particles that could contaminate the particleboard. Store flat on stickers on a level, hard, dry surface. Constant relative humidity and temperature should be maintained. Before use, allow to stabilize to the same conditions as are expected after the panel is installed. Condition 48 to 72 hours prior to lamination.
Arauco - Trupan MDF Panel

To buy, choose from the options.