Technical data sheet
Cleaner for Hot Melt Equipment
Product # 82711
This product is designed to clean hot melt adhesive melting tanks
TECHNICAL SPECIFICATIONS
Product #
82711
Weight
9.92 lb*
Color
Transparent
Flash Point
200 °C (392 °F)
Brand
Kleiberit
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
APPLICATION
1. When adhesive melting tanks are clogged or carbonized, heat to 250 °C (482 °F) and empty most of the glue.
2. Pour the cleaner into the heated tank to a height of 2 to 3 cm.
3. Leave to work.
4. In 30 minutes, the cleaner dissolves the glue residue.
5. Scrape any remaining residue with a spatula.
6. Empty the cleaner from the tank.
7. Refill the tank with new hot melt glue granules.
8. Remove any cleaner remaining on the roller by using the dosing device.
9. Pre-coat edgebanding with the glue until the roller is clean.
10. Application of edgebanding can begin once the dosing device is readjusted.
2. Pour the cleaner into the heated tank to a height of 2 to 3 cm.
3. Leave to work.
4. In 30 minutes, the cleaner dissolves the glue residue.
5. Scrape any remaining residue with a spatula.
6. Empty the cleaner from the tank.
7. Refill the tank with new hot melt glue granules.
8. Remove any cleaner remaining on the roller by using the dosing device.
9. Pre-coat edgebanding with the glue until the roller is clean.
10. Application of edgebanding can begin once the dosing device is readjusted.
IMPORTANT INFORMATION
Primary irritant effect:
-on skin: no irritant effect; OECD-Test 404
- on eyes: no irritating effect; OECD-Test 405
-on skin: no irritant effect; OECD-Test 404
- on eyes: no irritating effect; OECD-Test 405
