Technical Data Sheet
Xcite Guns with Swivel and Tip
Product # 668720100
The Xcite" gun is the result of the Kremlin Rexson experience since 1975. The Xcite" gun brings excellent ergonomics to the operator. Its ultra light trigger, handle design, and fluid swivel all reduce operator fatigue. This improves productivity and minimizes the risk of repetitive strain injuries. The Xcite" gun uses high quality components, which ensure a reliable gun while maintaining top notch performance. The latest generation of Airmix® atomization delivers unsurpassed finish quality. The operator has the ability to significantly vary the fan pattern width, without changing tips. This is very useful when painting complex shaped parts.
ADVANTAGES AND BENEFITS
- Ergonomic design and light trigger (reduced fatigue and excellent working conditions for increased productivity).
- Product swivel fitting (idem).
- Product fluid passages in stainless steel (compatible with water-based materials).
- Nickeled brass air needle (long service life and good reliability).
- Large and fine fan width adjustment (ability to adjust the fan width to the shape of the part to be painted leads to higher efficiency and productivity).
- Increased atomization quality (outstanding spraying quality with reduced overspray).
- Increased transfer efficiency (idem).
- E-Z adjust aircap (quick, easy adjustment).
- Product swivel fitting (idem).
- Product fluid passages in stainless steel (compatible with water-based materials).
- Nickeled brass air needle (long service life and good reliability).
- Large and fine fan width adjustment (ability to adjust the fan width to the shape of the part to be painted leads to higher efficiency and productivity).
- Increased atomization quality (outstanding spraying quality with reduced overspray).
- Increased transfer efficiency (idem).
- E-Z adjust aircap (quick, easy adjustment).
TECHNICAL SPECIFICATIONS
Product #
668720100
Type
Fine Finish
Transfer Type
HVLP
Using Glue
Waterborne, Solventborne
Features
Xcite Gun - 120 Bars, 1 - Swivel Fitting
Brand
Sames Kremlin
APPLICATION
Suitable for:
- Solvent or water-based materials
- Varnishes
- Lacquers
- Polyurethanes
- Two components
- High solids
- Stains
- UV-Curing
- WB glues
- Solvent or water-based materials
- Varnishes
- Lacquers
- Polyurethanes
- Two components
- High solids
- Stains
- UV-Curing
- WB glues
IMPORTANT INFORMATION
Sprayed materials: Polyurethanes, water-based products, high solids, two-components products, stains, lacquers, varnishes, etc.
Body of the gun: Forged aluminum
Fluid pressure range: 1740-2900-5800 psi (120-200-400 bar)
Maximum air inlet pressure: 87 psi (6 bar)
Recommended atomization air pressure 11.6 - 43 psi (0.7 - 3 bar)
Fluid output: Depends on the tip used
Weight without fluid swivel fitting: 16 oz (498 g)
Weight with fluid swivel fitting: 19.1 oz (564 g) Xcite" 400 - 19.2 oz (587 g)
Maximum fluid temperature: 122°F (50°C)
Air consumption: 1.8 - 4.4 cfm (3.2 - 7.5 m3/h)
Wetted parts: Stainless steel, PTFE, carbide
Safety: Trigger lock
Filter (fitted on fluid tube): #6 - 85 mesh / 168µ
Fittings
Fitting (Air inlet): M 1/4 NPS
Swivel fitting (Fluid inlet): M #5 JIC
Body of the gun: Forged aluminum
Fluid pressure range: 1740-2900-5800 psi (120-200-400 bar)
Maximum air inlet pressure: 87 psi (6 bar)
Recommended atomization air pressure 11.6 - 43 psi (0.7 - 3 bar)
Fluid output: Depends on the tip used
Weight without fluid swivel fitting: 16 oz (498 g)
Weight with fluid swivel fitting: 19.1 oz (564 g) Xcite" 400 - 19.2 oz (587 g)
Maximum fluid temperature: 122°F (50°C)
Air consumption: 1.8 - 4.4 cfm (3.2 - 7.5 m3/h)
Wetted parts: Stainless steel, PTFE, carbide
Safety: Trigger lock
Filter (fitted on fluid tube): #6 - 85 mesh / 168µ
Fittings
Fitting (Air inlet): M 1/4 NPS
Swivel fitting (Fluid inlet): M #5 JIC
