North American SDS
Foam / Fabric Adhesive Spray - LIONGRIP R1093NF
Product # R1093NF2071L
LIONGRIP R1093NF Foam / Fabric Adhesive Spray is a non-flammable based synthetic rubber spray adhesive formulated for bonding a variety of porous and non-porous substrates. It offers excellent spray ability, good open time and excellent bond adhesion along with the fire safety, and VOC exemptions obtained by using a non-flammable solvent.
ADVANTAGES AND BENEFITS
- Non-flammable
- Easy and uniform coverage
- Excellent bond adhesion
- Good heat resistance
- No reported VOC's
- Easy and uniform coverage
- Excellent bond adhesion
- Good heat resistance
- No reported VOC's
TECHNICAL SPECIFICATIONS
Product #
R1093NF2071L
Packing
Bulk/Liquid
Finish/Color
Green
Base
Synthetic Rubber
Volume
5 gal.
Open Time
30 minutes
Dry Time
2 to 4 minutes
VOC Concentration (EPA Method 24)
0 grams per liter
Viscosity
250 cps
Recommended Coverage
18.58 to 23.2 m²/3,78 l (200-250 sq. ft/gal)
Solids Content (approximate)
27%
Brand
Liongrip
Features
Low VOC (less than 250 g/l), Non-Flammable
Flash Point
None
APPLICATION
For bonding:
- Foam to foam and fabrics
- Fabric to wood, metal and plastics
- Foam to wood, metal and plastics
- And a variety of other surfaces
Intended for use in the manufacture of foam fabrication, bedding and mattress, insulation, decorative panels, carpeting underlayments, marine and automotive applications for carpeting and headliner applications.
To clean off excess glue, use LIONGRIP cleaner #RS02020L or RCCAR13C.
- Foam to foam and fabrics
- Fabric to wood, metal and plastics
- Foam to wood, metal and plastics
- And a variety of other surfaces
Intended for use in the manufacture of foam fabrication, bedding and mattress, insulation, decorative panels, carpeting underlayments, marine and automotive applications for carpeting and headliner applications.
To clean off excess glue, use LIONGRIP cleaner #RS02020L or RCCAR13C.
IMPORTANT INFORMATION
Do not apply using equipment that is made of or contains parts made of copper or aluminum.
Do not use in applications with copper or aluminum components.
Do not use on polystyrene foams or plasticized vinyls.
Do not mix with other adhesives. Thinning the adhesive is not recommended.
Do not use in applications with copper or aluminum components.
Do not use on polystyrene foams or plasticized vinyls.
Do not mix with other adhesives. Thinning the adhesive is not recommended.
