Square Spigot without Glass Drilling

To buy, choose from the options below.
Finish: Black Stainless Steel Matte Black Polished Stainless Steel Stainless Steel Safety Glass Thickness: 15/32 in* 13/32 to 1/2 in* Panel Height: Max. 39 3/8 in* Max. 47 5/8 in* Packaging format: Per unit Set Select Options
Product № Finish Safety Glass Thickness Panel Height Packaging format
SSSPIGOTSM169 Black Stainless Steel 15/32 in* Max. 47 5/8 in* Per unit
766SP0112205169 Black Stainless Steel 13/32 to 1/2 in* Max. 39 3/8 in* Set
SSSPIGOTSM900 Matte Black 15/32 in* Max. 47 5/8 in* Per unit
766SP0112205171 Polished Stainless Steel 13/32 to 1/2 in* Max. 39 3/8 in* Set
SSSPIGOTSM170 Stainless Steel 15/32 in* Max. 47 5/8 in* Per unit
766SP0112205170 Stainless Steel 13/32 to 1/2 in* Max. 39 3/8 in* Set

Description

Allows to align glass panels

The bracket has four adjusting screws at the base with a stainless steel plate to help align and level a series of panels when the horizontal mounting surface is slightly uneven.

ADVANTAGES AND BENEFITS

Creates an elegant clamp look with the trim plate as a cover for the base and screws.
No glass milling or fabrication required.

TECHNICAL SPECIFICATIONS

Recommended Location Usage
Interior, Exterior, Coastal
Height
6 5/16 in*
Material
Stainless Steel: Duplex 2205
Glass Drilling
Not Required
Width
3 15/16 in*
Length
3 15/16 in*
Type of Mounting
Floor Mount
Category
Spigots
Disclaimer

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.

APPLICATION

Mounted directly on the floor of the balcony or the terrasse.

INCLUDED PRODUCT(S)

1 bracket and 1 trim plate

IMPORTANT INFORMATION

For safety purposes, use tempered glass.
Not designed for guardrail applications.

This illustration is provided for visual reference only. Actual product may vary. Order hardware before starting the job. The manufacturer reserves the right to change product and information without notice. Always follow the instructions inside the package.

The customer may not in any case make a claim following the use of these documents. The Company disclaims any responsibility for the structural details related to a construction or project.

Installation must always be done by qualified personnel. Make sure that the product is properly installed using suitable fixtures on the support material. Never exceed the maximum load or size recommended by the manufacturer.

DISCLAIMER

The preceding information, as well as any technical recommendation given in writing or verbally, whether based on tests or not, is provided to the best of our knowledge. Recommendations are non-binding and do not diminish your responsibility for determining the correctness of these recommendations and the suitability of the product for your particular purpose. The application, use or processing of our products, as well as the execution of projects based on our technical recommendations are beyond our control and therefore exclusively your responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.
Square Spigot without Glass Drilling
Square Spigot without Glass Drilling
To buy, choose from the options.