Line art
Large Square Glass Clamp for Flat Surface Mounting, with Set Screw
Product # SSGC431XXSET
35 mm high with safety pin
This clamp is designed for mounting a glass panel onto a flat surface. A safety pin must always be used to prevent glass from slipping.
A pressure screw ensures additional stability and security, adhering the clamp to the glass to further prevent sliding.
Included gaskets for 10 to 12 mm thick glass are required for installation.
A pressure screw ensures additional stability and security, adhering the clamp to the glass to further prevent sliding.
Included gaskets for 10 to 12 mm thick glass are required for installation.
ADVANTAGES AND BENEFITS
Stability and safety of the glass when the clamp is used with the safety pin.
TECHNICAL SPECIFICATIONS
Product #
SSGC431XXSET
Type of Mounting
Wall Mount, Post Mount
Recommended Location Usage
Interior, Exterior
Finish
Satin Stainless Steel
Glass Drilling
Required
Safety Glass Thickness
13/32 to 15/32 in*
Height
2 5/32 in*
Width
1 3/32 in*
Length
2 5/32 in*
Material
Stainless Steel 316
Baluster Post Size
40 mm x 40 mm (1 9/16" x 1 9/16")
Adjustment
Fixed Position
Category
Clamps
Baluster Post Type
Square Tube
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
INCLUDED PRODUCT(S)
Square clamp, large
Safety pin
Gaskets for 10 to 12 mm thick glass
Pressure screw
Safety pin
Gaskets for 10 to 12 mm thick glass
Pressure screw
DISCLAIMER
If a saftey pin is not used during installation, there is a risk the glass will slip.
If using a safety pin, the glass will need to be drilled.
Ensure the use of proper gaskets, according to the thickness of the glass panel.
Safety glass is always recommended.
Product image is provided for reference only. The product may differ from the illustration.
Order hardware before undertaking manufacturing or assembly work.
Always follow instructions on product packaging as the manufacturer reserves the right to modify any product or product information without prior notice.
All technical drawings and documents illustrate examples of mounting strategies. In no case may the client make a claim based on use of the technical documents. The manusfacturer declines any responsibility regarding the structural details of any installation or project involving the hardware.
Alway ensure that installation is carried out by qualified professionals. Always ensure that the product is mounted onto an appropriate material.
If using a safety pin, the glass will need to be drilled.
Ensure the use of proper gaskets, according to the thickness of the glass panel.
Safety glass is always recommended.
Product image is provided for reference only. The product may differ from the illustration.
Order hardware before undertaking manufacturing or assembly work.
Always follow instructions on product packaging as the manufacturer reserves the right to modify any product or product information without prior notice.
All technical drawings and documents illustrate examples of mounting strategies. In no case may the client make a claim based on use of the technical documents. The manusfacturer declines any responsibility regarding the structural details of any installation or project involving the hardware.
Alway ensure that installation is carried out by qualified professionals. Always ensure that the product is mounted onto an appropriate material.
