Line art
Small Square Glass Clamp for Flat Surface Mounting
To add to cart, choose from the options below.
45 mm high with safety pin
Clamp for mounting a glass panel on a flat surface or between two square posts.
Glass drilling is required.
Gaskets (sold separately) are required for installation.
Choose gaskets based on thickness of glass for a perfect assembly.
Glass drilling is required.
Gaskets (sold separately) are required for installation.
Choose gaskets based on thickness of glass for a perfect assembly.
| Product # | Recommended Location Usage | Finish | Material |
|---|---|---|---|
| SSGC301XXZMB | Interior | Matte Black | Zamak |
| SSGC301XXZMS | Interior | Satin | Zamak |
| SSGC301XX16B | Interior / Exterior | Satin Black | Stainless Steel 316 |
| SSGC301XX16S | Interior / Exterior | Satin Stainless Steel | Stainless Steel 316 |
ADVANTAGES AND BENEFITS
Stability and safety of the glass when the clamp is used with the safety pin.
REQUIRED PRODUCTS
Requires ONE of the following products
Set
OR
Set
OR
Set
TECHNICAL SPECIFICATIONS
Type of Mounting
Wall Mount, Post Mount
Glass Drilling
Required
Safety Glass Thickness
6 to 10 mm
Height
45 mm
Width
26 mm
Length
45 mm
Baluster Post Size
40 mm x 40 mm (1 9/16" x 1 9/16")
Adjustment
Fixed Position
Category
Clamps
Baluster Post Type
Square Tube
DISCLAIMER
If a saftey pin is not used during installation, there is a risk the glass will slip.
If using a safety pin, the glass will need to be drilled.
Ensure the use of proper gaskets, according to the thickness of the glass panel.
Safety glass is always recommended.
Product image is provided for reference only. The product may differ from the illustration.
Order hardware before undertaking manufacturing or assembly work.
Always follow instructions on product packaging as the manufacturer reserves the right to modify any product or product information without prior notice.
All technical drawings and documents illustrate examples of mounting strategies. In no case may the client make a claim based on use of the technical documents. The manufacturer declines any responsibility regarding the structural details of any installation or project involving the hardware.
Alway ensure that installation is carried out by qualified professionals. Always ensure that the product is mounted onto an appropriate material.
If using a safety pin, the glass will need to be drilled.
Ensure the use of proper gaskets, according to the thickness of the glass panel.
Safety glass is always recommended.
Product image is provided for reference only. The product may differ from the illustration.
Order hardware before undertaking manufacturing or assembly work.
Always follow instructions on product packaging as the manufacturer reserves the right to modify any product or product information without prior notice.
All technical drawings and documents illustrate examples of mounting strategies. In no case may the client make a claim based on use of the technical documents. The manufacturer declines any responsibility regarding the structural details of any installation or project involving the hardware.
Alway ensure that installation is carried out by qualified professionals. Always ensure that the product is mounted onto an appropriate material.
