Round Glass Mounted Fixed Bracket

Product # HR1847840077170

Fixed bracket

With its simple design, this stainless steel adjustable inline bracket is ideal for all your handrail and staircase projects. Designed to support round or flat surface handrails off a glass panel. Easy to install, the bracket must pass through the glass for installation, and the handrail must be screwed onto the saddle.

ADVANTAGES AND BENEFITS

Available in 304 finish for interior installation and 316 for interior or exterior installation.

The design of this product meets industrial standards and safety codes. Always consult a certified engineer to make sure that your installation will comply with the local building code.

TECHNICAL SPECIFICATIONS

Product #
HR1847840077170
Type of Mounting
Glass Mount
Handrail Type
Flat Tubing
Recommended Location Usage
Interior
Adjustment
Fixed Position
Finish
Stainless Steel
Height
1 31/32 in*
Projection
3 1/32 in*
Material
Stainless Steel 304
Safety Glass Thickness
15/32 to 1 3/16 in*
Handrail Size
40 mm x 40 mm (1 9/16" x 1 9/16")
Glass Drilling
Required
Thread Type
M8
Milling Diameter
25/32 in*
Disclaimer

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.

IMPORTANT INFORMATION

For safety purposes, use tempered glass.
This illustration is provided for visual reference only. Actual product may differ from the illustration. Order hardware before starting the job. The manufacturer reserves the right to change product and information without notice. Always use the instructions inside the package.
The use of power tools during installation may damage the hinges and decorative hardware.
The glass must be shaped according to the section plane provided in the box.
Always set the product in a suitable material.
Never exceed the load or maximum size recommended by the manufacturer.
Never use a spray lubricant on this product.
Maintenance: clean with a soft cloth and non-abrasive soap or ammonia.


Drawings and technical documents contain examples of hardware from different manufacturers. The customer may in no case make a claim following the use of these documents. The Company disclaims any responsibility for the structural details related to a construction or project. Installation must be done by qualified personnel. Always make sure that the product is properly installed using suitable fixings to the support material. Never exceed the load or maximum size recommended by the manufacturer. Never use a spray lubricant on this product.

DISCLAIMER

The preceding information as well as any technical recommendation given in writing, verbally or based on tests is provided to the best of our knowledge. However, recommendations are non-binding and do not diminish your responsibility for determining the correctness of these recommendations and the suitability of the product for your particular purpose. The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore exclusively your responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.

RELATED DOCUMENTS