Round Wall Mount Fixed Bracket with Cover Plate
To add to cart, choose from the options below.
For standard space
Stainless steel bracket with cast 3-hole mounting plate, designed for mounting a handrail on a wall.
Can be installed with round or flat surface handrails by choosing the appropriate saddle (sold separately).
The screws to install the saddle and the snap-fit plate cover are included with the bracket.
Can be installed with round or flat surface handrails by choosing the appropriate saddle (sold separately).
The screws to install the saddle and the snap-fit plate cover are included with the bracket.
Product # | Arm Size | Arm Height |
---|---|---|
SSWB111216S | 1/2 in | 1 15/16 in |
SSWB111426S | 9/16 in | 3 in |
ADVANTAGES AND BENEFITS
Slotted holes on mounting plate allow for more flexibility in adjusting the angle during installation.
TECHNICAL SPECIFICATIONS
Type of Mounting
Wall Mount
Recommended Location Usage
Interior, Exterior
Adjustment
Fixed Position
Finish
Satin Stainless Steel
Projection
3 1/8 in
Material
Stainless Steel 316
Mounting Side
Reversible
Glass Drilling
Not Required
Mounting Plate
2 5/16 in
Saddle
Sold Separately
Screw
Not Included
INCLUDED PRODUCT(S)
Includes snap-fit finishing wall plate for easy installation.
Mounting and assembly screws not included.
Mounting and assembly screws not included.
IMPORTANT INFORMATION
This illustration is provided for visual reference only. Actual product may vary. Order hardware before starting the job. The manufacturer reserves the right to change product and information without notice. Always follow the instructions inside the package.
Drawings and technical documents contain examples of hardware from different manufacturers. The customer may not in any case make a claim following the use of these documents. The Company disclaims any responsibility for the structural details related to a construction or project.
Installation must always be done by qualified personnel. Make sure that the product is properly installed in the support material using proper fixtures. Never exceed the maximum load or size recommended by the manufacturer. Never use a spray lubricant on this product.
Drawings and technical documents contain examples of hardware from different manufacturers. The customer may not in any case make a claim following the use of these documents. The Company disclaims any responsibility for the structural details related to a construction or project.
Installation must always be done by qualified personnel. Make sure that the product is properly installed in the support material using proper fixtures. Never exceed the maximum load or size recommended by the manufacturer. Never use a spray lubricant on this product.
APPLICATION
- For bracket installation: hanger bolt M8 x 12.7 mm (1/2"), 3-5/32" in length (HR93010088014)
- For handrail tubing: #8 x 25 mm (1") pan head (PKTS81VP)
- For handrail tubing: #8 x 25 mm (1") pan head (PKTS81VP)
DISCLAIMER
The preceding information as well as any technical recommendation given in writing, verbally or based on tests is provided to the best of our knowledge. However, recommendations are non-binding and do not diminish your responsibility for determining the correctness of these recommendations and the suitability of the product for your particular purpose. The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore exclusively your responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.