Round Wall Mount Height-Adjustable Bracket
To add to cart, choose from the options below.
Adjusts vertically from 40 to 80 mm
Stainless steel bracket designed for mounting a handrail on a wall; adjustable to easily reach to your desired height.
Can be installed with round or flat surface handrails by choosing the appropriate saddle (sold separately).
The screws to install the saddle are included with the bracket.
Can be installed with round or flat surface handrails by choosing the appropriate saddle (sold separately).
The screws to install the saddle are included with the bracket.
Product # | Finish | Mounting Plate |
---|---|---|
SSWF100X16GB | Graphite Black | 1 1/2 in |
SSWF001001GB | Graphite Black | 1 15/16 in |
SSWF100X16S | Stainless Steel | 1 1/2 in |
SSWF0010016S | Stainless Steel | 1 15/16 in |
ADVANTAGES AND BENEFITS
- Single mounting point for quick and easy installation
- Adjusts vertically from 40 to 80 mm
- Adjusts vertically from 40 to 80 mm
TECHNICAL SPECIFICATIONS
Type of Mounting
Wall Mount
Recommended Location Usage
Interior, Exterior
Adjustment
Adjustable Height
Projection
3 1/8 in
Material
Stainless Steel 316
Mounting Side
Reversible
Glass Drilling
Not Required
Arm Size
1 in
Saddle
Sold Separately
Arm Height
3 13/16 in
Screw
Not Included
Thread Type
M8
IMPORTANT INFORMATION
This illustration is provided for visual reference only. Actual product may vary. Order hardware before starting the job. The manufacturer reserves the right to change product and information without notice. Always follow the instructions inside the package.
Drawings and technical documents contain examples of hardware from different manufacturers. The customer may not in any case make a claim following the use of these documents. The Company disclaims any responsibility for the structural details related to a construction or project.
Installation must always be done by qualified personnel. Make sure that the product is properly installed using suitable fixtures on the support material. Never exceed the maximum load or size recommended by the manufacturer.
The design of this product meets industry standards and safety code requirements. Always consult a licensed engineer prior to assembly to ensure that the installation meets the requirements of local building codes. Never use a spray lubricant on this product.
Drawings and technical documents contain examples of hardware from different manufacturers. The customer may not in any case make a claim following the use of these documents. The Company disclaims any responsibility for the structural details related to a construction or project.
Installation must always be done by qualified personnel. Make sure that the product is properly installed using suitable fixtures on the support material. Never exceed the maximum load or size recommended by the manufacturer.
The design of this product meets industry standards and safety code requirements. Always consult a licensed engineer prior to assembly to ensure that the installation meets the requirements of local building codes. Never use a spray lubricant on this product.
DISCLAIMER
The preceding information as well as any technical recommendation given in writing, verbally or based on tests is provided to the best of our knowledge. However, recommendations are non-binding and do not diminish your responsibility for determining the correctness of these recommendations and the suitability of the product for your particular purpose. The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore exclusively your responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.