Landing End Posts - Frameless

To add to cart, choose from the options below.

For landing or landing return

Height: 36 1/4 in 42 1/8 in Finish: Satin Black Satin Black Satin Stainless Steel Satin Stainless Steel Material: Stainless Steel 304 Stainless Steel 304 Stainless Steel 316 Stainless Steel 316 Select Options
Product # Height Finish Material
SSPEFT36LNEB 36 1/4 in Satin Black Stainless Steel 304
SSPEFT36LNES 36 1/4 in Satin Stainless Steel Stainless Steel 316
SSPEFT42LNEB 42 1/8 in Satin Black Stainless Steel 304
SSPEFT42LNES 42 1/8 in Satin Stainless Steel Stainless Steel 316


- Fully engineered and designed for indoor and outdoor projects
- Fully welded end caps provide an open and frameless look for an unobstructed view
- Fully welded 4" solid cast stainless steel base plates with flat push-fit base plate covers
- Large square glass clamps secured by M8x20 stainless steel fasteners through flow-drilled and tapped holes to the posts included
- Suitable for 10 or 12 mm glass


End/Turn Post
Mounting Position
Type of Mounting
Floor Mount
Safety Glass Thickness
13/32 to 15/32 in*
Recommended Location Usage
Interior, Exterior
Baluster Post Type
Square Tube

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.


- Post
- Large glass clamps with M8 x 20 fasteners
- Gaskets for 10 or 12 mm glass
- Base plate
- Base plate cover


For safety purposes, use tempered glass.

Configurations show the positions and sizes of posts only and do not include the placement of a handrail. For stairs, a handrail i s required to comply with code. Please consult with local building codes to adhere to requirements.

This illustration is provided for visual reference only. Actual product may vary. Order hardware before starting the job. The manufacturer reserves the right to change product and information without notice. Always follow the instructions inside the package.

The customer may not in any case make a claim following the use of these documents. The Company disclaims any responsibility for the structural details related to a construction or project.

Installation must always be done by qualified personnel. Make sure that the product is properly installed using suitable fixtures on the support material. Never exceed the maximum load or size recommended by the manufacturer.


The preceding information as well as any technical recommendation given in writing, verbally, or based on tests is provided to the best of our knowledge. However, recommendations are non-binding and do not diminish your responsibility for determining the correctness of these recommendations and the suitability of the product for your particular purpose. The application, use, or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore exclusively your responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.