Flush Handle

Product №: 89058860E185


With grip ring

Smooth door surfaces gain even more elegance and functionality with flush handles.
- Hidden stop prevents end stops from hitting visible surfaces.
- Ergonomic ring is in the grip part of the handle as it has a slightly rounded edge.
- Diamond-cut surface for perfectly flat and glossy polished finishes.
- AISI 316 stainless steel pin.
- Screws provided to match the required finish.


- Filo top with no protruding parts.
- Excellent ring grip.
- Stainless steel pin (resistance to atmospheric agents, durability over time and high traction resistance).
- Hot pressing - Drilling and pin installation - Diamond-cut surface.


Product №
Door Type
Pocket Door, Sliding Door
Satin Nickel
Door Thickness
Min. 1 in
Fixing Technique
Mortise Case Length
2 7/32 in*
Center to Center Drilling (Spacing)
1 17/32 to 2 1/4 in*
Mortise Case Width
1 23/32 in*
Plate Style
Plate length
2 19/32 in*
Width - Plate
1 7/8 in*
3/32 in*

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.


Tilting ring by means of rotation pivoted on the AISI 303 stainless steel pin.
Picture for visual reference only: actual product may vary from that shown in photo.
Be sure to order hardware before beginning fabrication or installation work.
Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes or modify information without prior notice.
All technical drawings and documents contain examples of the assembly of different suppliers' hardware. The customer cannot base any claims on the use of these documents. No responsibility is assumed for design details relating to a particular construction project.
At all times, execution and installation must be undertaken by qualified persons.
Never exceed the maximum weight or the maximum dimensions recommended by the manufacturer.
Always be sure to install the product correctly using the right fasteners for your materials.
Never use any spray lubricant on these products.


The preceding information, as well as any technical recommendations given in writing, verbally or based on tests, is provided to the best of our knowledge. However, they are non-binding recommendations only and do not affect your responsibility to determine the correctness of given recommendations and suitability of the product for your particular purposes. The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore fall exclusively in your area of responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.