1 1/4" (32 mm) Diameter Back-to-Back Ladder Handle

Product #: 705362432169
Set
Color/Finish: Black Stainless Steel Center to Center Drilling (Spacing): 24 in Height: 36 in Glass Thickness: 13/32 to 15/32 in* Projection: 2 27/32 in* Usage: Sliding Door / Hinge Door Milling Diameter: 9/16 in* Screw/Nail: Included / M8 Modify Options
Product number Color/Finish Center to Center Drilling (Spacing) Height Glass Thickness Projection Washers Diameter
705362432169 Black Stainless Steel 24 in 36 in 13/32 to 15/32 in* 2 27/32 in*  
705483632169 Black Stainless Steel 36 in 48 in 13/32 to 15/32 in* 2 27/32 in*  
705604832169 Black Stainless Steel 48 in 60 in 13/32 to 15/32 in* 2 27/32 in*  
705726032169 Black Stainless Steel 60 in 72 in 13/32 to 15/32 in* 2 27/32 in*  
701DH2R10324900 Matte Black 12 in 24 in 5/16 to 15/32 in* 2 27/32 in*  
701DH2R10336900 Matte Black 24 in 36 in 5/16 to 15/32 in* 2 27/32 in*  
701DH2R10348900 Matte Black 36 in 48 in 13/32 to 15/32 in* 3.22 in  
701DH2R10360900 Matte Black 48 in 60 in 13/32 to 15/32 in* 3.22 in  
701DH2R10372900 Matte Black 60 in 72 in 5/16 to 15/32 in* 2 27/32 in*  
70512632170 Stainless Steel 6 in 12 in 5/16 to 15/32 in* 2 27/32 in* 1 1/4 in*
705241232170 Stainless Steel 12 in 24 in 5/16 to 15/32 in* 2 27/32 in* 1 1/4 in*
705362432170 Stainless Steel 24 in 36 in 5/16 to 15/32 in* 2 27/32 in* 1 1/4 in*
705483632170 Stainless Steel 36 in 48 in 5/16 to 15/32 in* 2 27/32 in* 1 1/4 in*
705604832170 Stainless Steel 48 in 60 in 5/16 to 15/32 in* 2 27/32 in* 1 1/4 in*
705726032170 Stainless Steel 60 in 72 in 5/16 to 15/32 in* 2 27/32 in* 1 1/4 in*
705241232171 Chrome / Polished Stainless Steel 12 in 24 in 5/16 to 15/32 in* 2 27/32 in* 1 1/4 in*
705362432171 Chrome / Polished Stainless Steel 24 in 36 in 5/16 to 15/32 in* 2 27/32 in* 1 1/4 in*
705483632171 Chrome / Polished Stainless Steel 36 in 48 in 5/16 to 15/32 in* 2 27/32 in* 1 1/4 in*
705604832171 Chrome / Polished Stainless Steel 48 in 60 in 5/16 to 15/32 in* 2 27/32 in* 1 1/4 in*
705726032171 Chrome / Polished Stainless Steel 60 in 72 in 5/16 to 15/32 in* 2 27/32 in* 1 1/4 in*

Description

Door handle

TECHNICAL SPECIFICATIONS

Product number
705362432169
Diameter
1 1/4 in*
Manufacturing Material
Stainless Steel: 316
Door Type
Glass, Wood, Architectural
Door Thickness
1 3/8 to 1 31/32 in*
Function
Pull Handle
Disclaimer

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.

IMPORTANT INFORMATION

This illustration is provided for visual reference only. Actual product may vary. Order hardware before starting the job. The manufacturer reserves the right to change product and information without notice. Always follow the instructions inside the package.

Drawings and technical documents contain examples of hardware from different manufacturers. The customer may not in any case make a claim following the use of these documents. The Company disclaims any responsibility for the structural details related to a construction or project.

Installation must always be done by qualified personnel. Make sure that the product is properly installed using suitable fixtures on the support material. Never exceed the maximum load or size recommended by the manufacturer. Never use a spray lubricant on this product. Clean with a soft cloth and soap that is ammonia-free and nonabrasive. Always use a dry cloth to remove debris, dust and residues (sawdust and/or aluminum dust) from rails before installing hangers.

RELATED DOCUMENTS

DISCLAIMER

The preceding information, as well as any technical recommendation given in writing or verbally, whether based on tests or not, is provided to the best of our knowledge. Recommendations are non-binding and do not diminish your responsibility for determining the correctness of these recommendations and the suitability of the product for your particular purpose. The application, use or processing of our products, as well as the execution of projects based on our technical recommendations are beyond our control and therefore exclusively your responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.
1 1/4" (32 mm) Diameter Back-to-Back Ladder Handle

Product number: 705362432169

Set