SLIDING DOOR HANDLES
3/4" (19 mm) Diameter Back-to-Back Ladder Handle
|Product №||Color/Finish||Center to Center Drilling (Spacing)||Door Type||Glass Thickness||Door Thickness||Height|
|87H2R1001924170||Brushed Nickel / Stainless Steel||24 in||Glass||1/4 to 15/32 in*||28 in|
|87H2R1001912900||Matte Black||12 in||Glass / Wood / Architectural||5/16 to 15/32 in*||1 3/8 to 1 31/32 in*||16 in|
|87H2R1001924900||Matte Black||24 in||Glass / Wood / Architectural||5/16 to 15/32 in*||1 3/8 to 1 31/32 in*||28 in|
|87H2R198170||Brushed Nickel / Stainless Steel||8 in||Glass||1/4 to 15/32 in*||12 in|
|87H2R1001910170||Brushed Nickel / Stainless Steel||10 in||Glass||1/4 to 15/32 in*||14 in|
|87H2R1001912170||Brushed Nickel / Stainless Steel||12 in||Glass||1/4 to 15/32 in*||16 in|
|87H2R196171||Chrome / Polished Stainless Steel||6 in||Glass||1/4 to 15/32 in*||10 in|
|87H2R198171||Chrome / Polished Stainless Steel||8 in||Glass||1/4 to 15/32 in*||12 in|
|87H2R1001910171||Chrome / Polished Stainless Steel||10 in||Glass||1/4 to 15/32 in*||14 in|
|87H2R196170||Satin Nickel / Stainless Steel||6 in||Glass||1/4 to 15/32 in*||10 in|
This classic back-to-back ladder-style handle is designed for glass doors. With its modern and simple design, this handle easily fits into any décor. Easy to install, drill two 12mm holes in the door, then insert both sides of the handle and tighten with the Allen wrench. The handle is perfect for hinged, sliding, and shower doors.
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
Drawings and technical documents contain examples of hardware from different manufacturers. The customer may not in any case make a claim following the use of these documents. The Company disclaims any responsibility for the structural details related to a construction or project.
Installation must always be done by qualified personnel. Make sure that the product is properly installed using suitable fixtures on the support material. Never exceed the maximum load or size recommended by the manufacturer. Never use a spray lubricant on this product. Clean with a soft cloth and soap that is ammonia-free and nonabrasive. Always use a dry cloth to remove debris, dust and residues (sawdust and/or aluminum dust) from rails before installing hangers.