Back-to-Back Square Ladder Handle with Square Mounting Rods

To buy, choose from the options below.
Center to Center Drilling (Spacing): 30.5 cm* 61 cm* 91.4 cm* 1.22 m* Color/Finish: Black Stainless Steel Stainless Steel Stainless Steel Chrome / Polished Stainless Steel Chrome / Polished Stainless Steel Height: 61 cm* 91.4 cm* 1.22 m* 1.52 m* Select Options
Product number Center to Center Drilling (Spacing) Color/Finish Height
701DH153224169 30.5 cm* Black Stainless Steel 61 cm*
701DH153236169 61 cm* Black Stainless Steel 91.4 cm*
701DH153248169 91.4 cm* Black Stainless Steel 1.22 m*
701DH153260169 1.22 m* Black Stainless Steel 1.52 m*
701DH153224170 30.5 cm* Stainless Steel 61 cm*
701DH153224171 30.5 cm* Chrome / Polished Stainless Steel 61 cm*
701DH153236170 61 cm* Stainless Steel 91.4 cm*
701DH153236171 61 cm* Chrome / Polished Stainless Steel 91.4 cm*
701DH153248170 91.4 cm* Stainless Steel 1.22 m*
701DH153248171 91.4 cm* Chrome / Polished Stainless Steel 1.22 m*
701DH153260170 1.22 m* Stainless Steel 1.52 m*
701DH153260171 1.22 m* Chrome / Polished Stainless Steel 1.52 m*

Description

TECHNICAL SPECIFICATIONS

Glass Thickness
8 to 12 mm
Width
32 mm
Manufacturing Material
Stainless Steel: 316
Door Type
Glass
Thickness
32 mm
Projection
72 mm
Function
Pull Handle
Usage
Sliding Door, Hinge Door
Screw/Nail
Included, M8
Milling Diameter
14 mm
Disclaimer

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.

IMPORTANT INFORMATION

Picture for visual reference only: actual product may vary from that shown in photo.
Be sure to order hardware before beginning fabrication or installation work.
Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes or modify information without prior notice.

All technical drawings and documents contain examples for the assembly of different suppliers' hardware.
The customer cannot make any claims based on the use of these documents.
No responsibility is assumed for design details relating to a construction or project.

At all times, execution and installation must be undertaken by qualified persons. Always be sure to install the product correctly using the appropriate fixation for your material. Never exceed the maximum weight or the maximum dimensions recommended by the manufacturer.

DISCLAIMER

The preceding information as well as any technical recommendations given in writing, verbally or based on tests are provided to the best of our knowledge. However, they are non-binding recommendations only and do not affect your responsibility to determine the correctness of given recommendations and suitability of the product for your particular purposes. The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore fall exclusively in your area of responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.
Back-to-Back Square Ladder Handle with Square Mounting Rods

To buy, choose from the options.