25.4 mm (1") Square Tubular Pull Handles for Back-to-Back Mounting

Product #: 701DHD2S103170
Center to Center Drilling (Spacing): 23 5/8 in* Height: 24 5/8 in* Door Type: Glass / Wood Projection: 2 3/4 in* Glass Thickness: 5/16 to 15/32 in* Door Thickness: 1 3/8 to 1 49/64 in Usage: Sliding Door / Hinge Door Modify Options
Product number Center to Center Drilling (Spacing) Height Door Type Projection Glass Thickness Door Thickness
701DHD2S103170 23 5/8 in* 24 5/8 in* Glass / Wood 2 3/4 in* 5/16 to 15/32 in* 1 3/8 to 1 49/64 in
87D2S100170 10 in 11 in Glass 2 3/8 in* 1/4 to 15/32 in*  

TECHNICAL SPECIFICATIONS

Product number
701DHD2S103170
Color/Finish
Stainless Steel
Manufacturing Material
Stainless Steel: 304
Width
1 in
Thickness
1 in
Function
Pull Handle
Brand
Riveo
Milling Diameter
15/32 in*
Disclaimer

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.

IMPORTANT INFORMATION

Picture for visual reference only: actual product may vary from that shown in photo.
Be sure to order hardware before beginning fabrication or installation work.
Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes or modify information without prior notice.
All technical drawings and documents contain examples for the assembly of different suppliers' hardware.
The customer cannot make any claims based on the use of these documents.
No responsibility is assumed for design details relating to a construction or project. At all times, execution and installation must be undertaken by qualified persons.
Never exceed the maximum weight or the maximum dimensions recommended by the manufacturer.
Always be sure to install the product correctly using the appropriate fixation for your material.

DISCLAIMER

The preceding information as well as any technical recommendations given in writing, verbally or based on tests are provided to the best of our knowledge. However, they are non-binding recommendations only and do not affect your responsibility to determine the correctness of given recommendations and suitability of the product for your particular purposes. The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore fall exclusively in your area of responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.
25.4 mm (1") Square Tubular Pull Handles for Back-to-Back Mounting

Product number: 701DHD2S103170

Set