Square Glass Clamp for Flat Mounting - Model 21

To buy, choose from the options below.
Manufacturing Material: Stainless Steel: 316 Zinc Recommended Location Usage: Interior Interior / Exterior Select Options
Product number Manufacturing Material Recommended Location Usage
HR14210000012 Stainless Steel: 316 Interior / Exterior
HR10210000000 Zinc Interior

Description

Model 21

Designed for posts with flat bases.

TECHNICAL SPECIFICATIONS

Height
1 25/32 in*
Length
1 25/32 in*
Color/Finish
Stainless Steel
Thickness
1 3/32 in*
Safety Glass Thickness
1/4 to 13/32 in*
Type of Mounting
Square Post-Tube
Balustrade Post Type
Square Tube
Milling Diameter
11/32 in*
Disclaimer

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.

ADVANTAGES AND BENEFITS

Increases glass stability when used with double-sided adhesive tape or when adding clamps at the bottom of the glass panel. Ideal for designing partitions, windshield screens or glass balustrades without handrails.

APPLICATION

Accepts M8 or similar mounting screws. Zinc clamps are meant for interior use only and stainless steel clamps are for exterior use. The glass panel must respect the maximum dimensions of 800 mm x 1,000 mm (31-1/2" x 39-3/8").

INCLUDED PRODUCT(S)

Pair of rubber holders for 6 mm (1/4") thick glass, as well as a pair for 10 mm (3/8") thick glass.
Lock pin not included.

RELATED DOCUMENTS

IMPORTANT INFORMATION

For safety purposes, use tempered glass.
The use of power tools during installation may damage the hinges and decorative hardware.
The glass must be shaped according to the section plane provided in the box.
Always set the product in a suitable material.
Never exceed the load or maximum size recommended by the manufacturer.
Never use a spray lubricant on this product.
Maintenance: clean with a soft cloth and non-abrasive soap or ammonia.
This illustration is provided for visual reference only. Actual product may differ from the illustration. Order hardware before starting the job. The manufacturer reserves the right to change product and information without notice. Always use the instructions inside the package.

Drawings and technical documents contain examples of hardware from different manufacturers. The customer may in no case make a claim following the use of these documents. The Company disclaims any responsibility for the structural details related to a construction or project. Installation must be done by qualified personnel. Always make sure that the product is properly installed using suitable fixings to the support material. Never exceed the load or maximum size recommended by the manufacturer. Never use a spray lubricant on this product.

DISCLAIMER

The preceding information as well as any technical recommendation given in writing, verbally or based on tests is provided to the best of our knowledge. However, recommendations are non-binding and do not diminish your responsibility for determining the correctness of these recommendations and the suitability of the product for your particular purpose. The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore exclusively your responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.
Square Glass Clamp for Flat Mounting - Model 21

To buy, choose from the options.